SY Autocompounding Pirex ETH (SY-apxETH) Token Tracker | Etherscan (2024)

Contract Source Code Verified (Exact Match)

File 1 of 34 : Initializable.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.9.0) (proxy/utils/Initializable.sol)pragma solidity ^0.8.2;import "../../utils/AddressUpgradeable.sol";/** * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect. * * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in * case an upgrade adds a module that needs to be initialized. * * For example: * * [.hljs-theme-light.nopadding] * ```solidity * contract MyToken is ERC20Upgradeable { * function initialize() initializer public { * __ERC20_init("MyToken", "MTK"); * } * } * * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable { * function initializeV2() reinitializer(2) public { * __ERC20Permit_init("MyToken"); * } * } * ``` * * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}. * * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity. * * [CAUTION] * ==== * Avoid leaving a contract uninitialized. * * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed: * * [.hljs-theme-light.nopadding] * ``` * /// @custom:oz-upgrades-unsafe-allow constructor * constructor() { * _disableInitializers(); * } * ``` * ==== */abstract contract Initializable { /** * @dev Indicates that the contract has been initialized. * @custom:oz-retyped-from bool */ uint8 private _initialized; /** * @dev Indicates that the contract is in the process of being initialized. */ bool private _initializing; /** * @dev Triggered when the contract has been initialized or reinitialized. */ event Initialized(uint8 version); /** * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope, * `onlyInitializing` functions can be used to initialize parent contracts. * * Similar to `reinitializer(1)`, except that functions marked with `initializer` can be nested in the context of a * constructor. * * Emits an {Initialized} event. */ modifier initializer() { bool isTopLevelCall = !_initializing; require( (isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1), "Initializable: contract is already initialized" ); _initialized = 1; if (isTopLevelCall) { _initializing = true; } _; if (isTopLevelCall) { _initializing = false; emit Initialized(1); } } /** * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be * used to initialize parent contracts. * * A reinitializer may be used after the original initialization step. This is essential to configure modules that * are added through upgrades and that require initialization. * * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer` * cannot be nested. If one is invoked in the context of another, execution will revert. * * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in * a contract, executing them in the right order is up to the developer or operator. * * WARNING: setting the version to 255 will prevent any future reinitialization. * * Emits an {Initialized} event. */ modifier reinitializer(uint8 version) { require(!_initializing && _initialized < version, "Initializable: contract is already initialized"); _initialized = version; _initializing = true; _; _initializing = false; emit Initialized(version); } /** * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the * {initializer} and {reinitializer} modifiers, directly or indirectly. */ modifier onlyInitializing() { require(_initializing, "Initializable: contract is not initializing"); _; } /** * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call. * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized * to any version. It is recommended to use this to lock implementation contracts that are designed to be called * through proxies. * * Emits an {Initialized} event the first time it is successfully executed. */ function _disableInitializers() internal virtual { require(!_initializing, "Initializable: contract is initializing"); if (_initialized != type(uint8).max) { _initialized = type(uint8).max; emit Initialized(type(uint8).max); } } /** * @dev Returns the highest version that has been initialized. See {reinitializer}. */ function _getInitializedVersion() internal view returns (uint8) { return _initialized; } /** * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}. */ function _isInitializing() internal view returns (bool) { return _initializing; }}

File 2 of 34 : AddressUpgradeable.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)pragma solidity ^0.8.1;/** * @dev Collection of functions related to the address type */library AddressUpgradeable { /** * @dev Returns true if `account` is a contract. * * [IMPORTANT] * ==== * It is unsafe to assume that an address for which this function returns * false is an externally-owned account (EOA) and not a contract. * * Among others, `isContract` will return false for the following * types of addresses: * * - an externally-owned account * - a contract in construction * - an address where a contract will be created * - an address where a contract lived, but was destroyed * * Furthermore, `isContract` will also return true if the target contract within * the same transaction is already scheduled for destruction by `SELFDESTRUCT`, * which only has an effect at the end of a transaction. * ==== * * [IMPORTANT] * ==== * You shouldn't rely on `isContract` to protect against flash loan attacks! * * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract * constructor. * ==== */ function isContract(address account) internal view returns (bool) { // This method relies on extcodesize/address.code.length, which returns 0 // for contracts in construction, since the code is only stored at the end // of the constructor execution. return account.code.length > 0; } /** * @dev Replacement for Solidity's `transfer`: sends `amount` wei to * `recipient`, forwarding all available gas and reverting on errors. * * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost * of certain opcodes, possibly making contracts go over the 2300 gas limit * imposed by `transfer`, making them unable to receive funds via * `transfer`. {sendValue} removes this limitation. * * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more]. * * IMPORTANT: because control is transferred to `recipient`, care must be * taken to not create reentrancy vulnerabilities. Consider using * {ReentrancyGuard} or the * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern]. */ function sendValue(address payable recipient, uint256 amount) internal { require(address(this).balance >= amount, "Address: insufficient balance"); (bool success, ) = recipient.call{value: amount}(""); require(success, "Address: unable to send value, recipient may have reverted"); } /** * @dev Performs a Solidity function call using a low level `call`. A * plain `call` is an unsafe replacement for a function call: use this * function instead. * * If `target` reverts with a revert reason, it is bubbled up by this * function (like regular Solidity function calls). * * Returns the raw returned data. To convert to the expected return value, * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`]. * * Requirements: * * - `target` must be a contract. * - calling `target` with `data` must not revert. * * _Available since v3.1._ */ function functionCall(address target, bytes memory data) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, "Address: low-level call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with * `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCall( address target, bytes memory data, string memory errorMessage ) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but also transferring `value` wei to `target`. * * Requirements: * * - the calling contract must have an ETH balance of at least `value`. * - the called Solidity function must be `payable`. * * _Available since v3.1._ */ function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) { return functionCallWithValue(target, data, value, "Address: low-level call with value failed"); } /** * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but * with `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value, string memory errorMessage ) internal returns (bytes memory) { require(address(this).balance >= value, "Address: insufficient balance for call"); (bool success, bytes memory returndata) = target.call{value: value}(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) { return functionStaticCall(target, data, "Address: low-level static call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall( address target, bytes memory data, string memory errorMessage ) internal view returns (bytes memory) { (bool success, bytes memory returndata) = target.staticcall(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a delegate call. * * _Available since v3.4._ */ function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) { return functionDelegateCall(target, data, "Address: low-level delegate call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`], * but performing a delegate call. * * _Available since v3.4._ */ function functionDelegateCall( address target, bytes memory data, string memory errorMessage ) internal returns (bytes memory) { (bool success, bytes memory returndata) = target.delegatecall(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract. * * _Available since v4.8._ */ function verifyCallResultFromTarget( address target, bool success, bytes memory returndata, string memory errorMessage ) internal view returns (bytes memory) { if (success) { if (returndata.length == 0) { // only check isContract if the call was successful and the return data is empty // otherwise we already know that it was a contract require(isContract(target), "Address: call to non-contract"); } return returndata; } else { _revert(returndata, errorMessage); } } /** * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the * revert reason or using the provided one. * * _Available since v4.3._ */ function verifyCallResult( bool success, bytes memory returndata, string memory errorMessage ) internal pure returns (bytes memory) { if (success) { return returndata; } else { _revert(returndata, errorMessage); } } function _revert(bytes memory returndata, string memory errorMessage) private pure { // Look for revert reason and bubble it up if present if (returndata.length > 0) { // The easiest way to bubble the revert reason is using memory via assembly /// @solidity memory-safe-assembly assembly { let returndata_size := mload(returndata) revert(add(32, returndata), returndata_size) } } else { revert(errorMessage); } }}

File 3 of 34 : IERC5267.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC5267.sol)pragma solidity ^0.8.0;interface IERC5267 { /** * @dev MAY be emitted to signal that the domain could have changed. */ event EIP712DomainChanged(); /** * @dev returns the fields and values that describe the domain separator used by this contract for EIP-712 * signature. */ function eip712Domain() external view returns ( bytes1 fields, string memory name, string memory version, uint256 chainId, address verifyingContract, bytes32 salt, uint256[] memory extensions );}

File 4 of 34 : Pausable.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.7.0) (security/Pausable.sol)pragma solidity ^0.8.0;import "../utils/Context.sol";/** * @dev Contract module which allows children to implement an emergency stop * mechanism that can be triggered by an authorized account. * * This module is used through inheritance. It will make available the * modifiers `whenNotPaused` and `whenPaused`, which can be applied to * the functions of your contract. Note that they will not be pausable by * simply including this module, only once the modifiers are put in place. */abstract contract Pausable is Context { /** * @dev Emitted when the pause is triggered by `account`. */ event Paused(address account); /** * @dev Emitted when the pause is lifted by `account`. */ event Unpaused(address account); bool private _paused; /** * @dev Initializes the contract in unpaused state. */ constructor() { _paused = false; } /** * @dev Modifier to make a function callable only when the contract is not paused. * * Requirements: * * - The contract must not be paused. */ modifier whenNotPaused() { _requireNotPaused(); _; } /** * @dev Modifier to make a function callable only when the contract is paused. * * Requirements: * * - The contract must be paused. */ modifier whenPaused() { _requirePaused(); _; } /** * @dev Returns true if the contract is paused, and false otherwise. */ function paused() public view virtual returns (bool) { return _paused; } /** * @dev Throws if the contract is paused. */ function _requireNotPaused() internal view virtual { require(!paused(), "Pausable: paused"); } /** * @dev Throws if the contract is not paused. */ function _requirePaused() internal view virtual { require(paused(), "Pausable: not paused"); } /** * @dev Triggers stopped state. * * Requirements: * * - The contract must not be paused. */ function _pause() internal virtual whenNotPaused { _paused = true; emit Paused(_msgSender()); } /** * @dev Returns to normal state. * * Requirements: * * - The contract must be paused. */ function _unpause() internal virtual whenPaused { _paused = false; emit Unpaused(_msgSender()); }}

File 5 of 34 : ERC20.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/ERC20.sol)pragma solidity ^0.8.0;import "./IERC20.sol";import "./extensions/IERC20Metadata.sol";import "../../utils/Context.sol";/** * @dev Implementation of the {IERC20} interface. * * This implementation is agnostic to the way tokens are created. This means * that a supply mechanism has to be added in a derived contract using {_mint}. * For a generic mechanism see {ERC20PresetMinterPauser}. * * TIP: For a detailed writeup see our guide * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How * to implement supply mechanisms]. * * The default value of {decimals} is 18. To change this, you should override * this function so it returns a different value. * * We have followed general OpenZeppelin Contracts guidelines: functions revert * instead returning `false` on failure. This behavior is nonetheless * conventional and does not conflict with the expectations of ERC20 * applications. * * Additionally, an {Approval} event is emitted on calls to {transferFrom}. * This allows applications to reconstruct the allowance for all accounts just * by listening to said events. Other implementations of the EIP may not emit * these events, as it isn't required by the specification. * * Finally, the non-standard {decreaseAllowance} and {increaseAllowance} * functions have been added to mitigate the well-known issues around setting * allowances. See {IERC20-approve}. */contract ERC20 is Context, IERC20, IERC20Metadata { mapping(address => uint256) private _balances; mapping(address => mapping(address => uint256)) private _allowances; uint256 private _totalSupply; string private _name; string private _symbol; /** * @dev Sets the values for {name} and {symbol}. * * All two of these values are immutable: they can only be set once during * construction. */ constructor(string memory name_, string memory symbol_) { _name = name_; _symbol = symbol_; } /** * @dev Returns the name of the token. */ function name() public view virtual override returns (string memory) { return _name; } /** * @dev Returns the symbol of the token, usually a shorter version of the * name. */ function symbol() public view virtual override returns (string memory) { return _symbol; } /** * @dev Returns the number of decimals used to get its user representation. * For example, if `decimals` equals `2`, a balance of `505` tokens should * be displayed to a user as `5.05` (`505 / 10 ** 2`). * * Tokens usually opt for a value of 18, imitating the relationship between * Ether and Wei. This is the default value returned by this function, unless * it's overridden. * * NOTE: This information is only used for _display_ purposes: it in * no way affects any of the arithmetic of the contract, including * {IERC20-balanceOf} and {IERC20-transfer}. */ function decimals() public view virtual override returns (uint8) { return 18; } /** * @dev See {IERC20-totalSupply}. */ function totalSupply() public view virtual override returns (uint256) { return _totalSupply; } /** * @dev See {IERC20-balanceOf}. */ function balanceOf(address account) public view virtual override returns (uint256) { return _balances[account]; } /** * @dev See {IERC20-transfer}. * * Requirements: * * - `to` cannot be the zero address. * - the caller must have a balance of at least `amount`. */ function transfer(address to, uint256 amount) public virtual override returns (bool) { address owner = _msgSender(); _transfer(owner, to, amount); return true; } /** * @dev See {IERC20-allowance}. */ function allowance(address owner, address spender) public view virtual override returns (uint256) { return _allowances[owner][spender]; } /** * @dev See {IERC20-approve}. * * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on * `transferFrom`. This is semantically equivalent to an infinite approval. * * Requirements: * * - `spender` cannot be the zero address. */ function approve(address spender, uint256 amount) public virtual override returns (bool) { address owner = _msgSender(); _approve(owner, spender, amount); return true; } /** * @dev See {IERC20-transferFrom}. * * Emits an {Approval} event indicating the updated allowance. This is not * required by the EIP. See the note at the beginning of {ERC20}. * * NOTE: Does not update the allowance if the current allowance * is the maximum `uint256`. * * Requirements: * * - `from` and `to` cannot be the zero address. * - `from` must have a balance of at least `amount`. * - the caller must have allowance for ``from``'s tokens of at least * `amount`. */ function transferFrom(address from, address to, uint256 amount) public virtual override returns (bool) { address spender = _msgSender(); _spendAllowance(from, spender, amount); _transfer(from, to, amount); return true; } /** * @dev Atomically increases the allowance granted to `spender` by the caller. * * This is an alternative to {approve} that can be used as a mitigation for * problems described in {IERC20-approve}. * * Emits an {Approval} event indicating the updated allowance. * * Requirements: * * - `spender` cannot be the zero address. */ function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) { address owner = _msgSender(); _approve(owner, spender, allowance(owner, spender) + addedValue); return true; } /** * @dev Atomically decreases the allowance granted to `spender` by the caller. * * This is an alternative to {approve} that can be used as a mitigation for * problems described in {IERC20-approve}. * * Emits an {Approval} event indicating the updated allowance. * * Requirements: * * - `spender` cannot be the zero address. * - `spender` must have allowance for the caller of at least * `subtractedValue`. */ function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) { address owner = _msgSender(); uint256 currentAllowance = allowance(owner, spender); require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero"); unchecked { _approve(owner, spender, currentAllowance - subtractedValue); } return true; } /** * @dev Moves `amount` of tokens from `from` to `to`. * * This internal function is equivalent to {transfer}, and can be used to * e.g. implement automatic token fees, slashing mechanisms, etc. * * Emits a {Transfer} event. * * Requirements: * * - `from` cannot be the zero address. * - `to` cannot be the zero address. * - `from` must have a balance of at least `amount`. */ function _transfer(address from, address to, uint256 amount) internal virtual { require(from != address(0), "ERC20: transfer from the zero address"); require(to != address(0), "ERC20: transfer to the zero address"); _beforeTokenTransfer(from, to, amount); uint256 fromBalance = _balances[from]; require(fromBalance >= amount, "ERC20: transfer amount exceeds balance"); unchecked { _balances[from] = fromBalance - amount; // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by // decrementing then incrementing. _balances[to] += amount; } emit Transfer(from, to, amount); _afterTokenTransfer(from, to, amount); } /** @dev Creates `amount` tokens and assigns them to `account`, increasing * the total supply. * * Emits a {Transfer} event with `from` set to the zero address. * * Requirements: * * - `account` cannot be the zero address. */ function _mint(address account, uint256 amount) internal virtual { require(account != address(0), "ERC20: mint to the zero address"); _beforeTokenTransfer(address(0), account, amount); _totalSupply += amount; unchecked { // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above. _balances[account] += amount; } emit Transfer(address(0), account, amount); _afterTokenTransfer(address(0), account, amount); } /** * @dev Destroys `amount` tokens from `account`, reducing the * total supply. * * Emits a {Transfer} event with `to` set to the zero address. * * Requirements: * * - `account` cannot be the zero address. * - `account` must have at least `amount` tokens. */ function _burn(address account, uint256 amount) internal virtual { require(account != address(0), "ERC20: burn from the zero address"); _beforeTokenTransfer(account, address(0), amount); uint256 accountBalance = _balances[account]; require(accountBalance >= amount, "ERC20: burn amount exceeds balance"); unchecked { _balances[account] = accountBalance - amount; // Overflow not possible: amount <= accountBalance <= totalSupply. _totalSupply -= amount; } emit Transfer(account, address(0), amount); _afterTokenTransfer(account, address(0), amount); } /** * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens. * * This internal function is equivalent to `approve`, and can be used to * e.g. set automatic allowances for certain subsystems, etc. * * Emits an {Approval} event. * * Requirements: * * - `owner` cannot be the zero address. * - `spender` cannot be the zero address. */ function _approve(address owner, address spender, uint256 amount) internal virtual { require(owner != address(0), "ERC20: approve from the zero address"); require(spender != address(0), "ERC20: approve to the zero address"); _allowances[owner][spender] = amount; emit Approval(owner, spender, amount); } /** * @dev Updates `owner` s allowance for `spender` based on spent `amount`. * * Does not update the allowance amount in case of infinite allowance. * Revert if not enough allowance is available. * * Might emit an {Approval} event. */ function _spendAllowance(address owner, address spender, uint256 amount) internal virtual { uint256 currentAllowance = allowance(owner, spender); if (currentAllowance != type(uint256).max) { require(currentAllowance >= amount, "ERC20: insufficient allowance"); unchecked { _approve(owner, spender, currentAllowance - amount); } } } /** * @dev Hook that is called before any transfer of tokens. This includes * minting and burning. * * Calling conditions: * * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens * will be transferred to `to`. * - when `from` is zero, `amount` tokens will be minted for `to`. * - when `to` is zero, `amount` of ``from``'s tokens will be burned. * - `from` and `to` are never both zero. * * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks]. */ function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual {} /** * @dev Hook that is called after any transfer of tokens. This includes * minting and burning. * * Calling conditions: * * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens * has been transferred to `to`. * - when `from` is zero, `amount` tokens have been minted for `to`. * - when `to` is zero, `amount` of ``from``'s tokens have been burned. * - `from` and `to` are never both zero. * * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks]. */ function _afterTokenTransfer(address from, address to, uint256 amount) internal virtual {}}

File 6 of 34 : draft-ERC20Permit.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/extensions/draft-ERC20Permit.sol)pragma solidity ^0.8.0;// EIP-2612 is Final as of 2022-11-01. This file is deprecated.import "./ERC20Permit.sol";

File 7 of 34 : ERC20Permit.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/extensions/ERC20Permit.sol)pragma solidity ^0.8.0;import "./IERC20Permit.sol";import "../ERC20.sol";import "../../../utils/cryptography/ECDSA.sol";import "../../../utils/cryptography/EIP712.sol";import "../../../utils/Counters.sol";/** * @dev Implementation of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612]. * * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by * presenting a message signed by the account. By not relying on `{IERC20-approve}`, the token holder account doesn't * need to send a transaction, and thus is not required to hold Ether at all. * * _Available since v3.4._ */abstract contract ERC20Permit is ERC20, IERC20Permit, EIP712 { using Counters for Counters.Counter; mapping(address => Counters.Counter) private _nonces; // solhint-disable-next-line var-name-mixedcase bytes32 private constant _PERMIT_TYPEHASH = keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)"); /** * @dev In previous versions `_PERMIT_TYPEHASH` was declared as `immutable`. * However, to ensure consistency with the upgradeable transpiler, we will continue * to reserve a slot. * @custom:oz-renamed-from _PERMIT_TYPEHASH */ // solhint-disable-next-line var-name-mixedcase bytes32 private _PERMIT_TYPEHASH_DEPRECATED_SLOT; /** * @dev Initializes the {EIP712} domain separator using the `name` parameter, and setting `version` to `"1"`. * * It's a good idea to use the same `name` that is defined as the ERC20 token name. */ constructor(string memory name) EIP712(name, "1") {} /** * @dev See {IERC20Permit-permit}. */ function permit( address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s ) public virtual override { require(block.timestamp <= deadline, "ERC20Permit: expired deadline"); bytes32 structHash = keccak256(abi.encode(_PERMIT_TYPEHASH, owner, spender, value, _useNonce(owner), deadline)); bytes32 hash = _hashTypedDataV4(structHash); address signer = ECDSA.recover(hash, v, r, s); require(signer == owner, "ERC20Permit: invalid signature"); _approve(owner, spender, value); } /** * @dev See {IERC20Permit-nonces}. */ function nonces(address owner) public view virtual override returns (uint256) { return _nonces[owner].current(); } /** * @dev See {IERC20Permit-DOMAIN_SEPARATOR}. */ // solhint-disable-next-line func-name-mixedcase function DOMAIN_SEPARATOR() external view override returns (bytes32) { return _domainSeparatorV4(); } /** * @dev "Consume a nonce": return the current value and increment. * * _Available since v4.1._ */ function _useNonce(address owner) internal virtual returns (uint256 current) { Counters.Counter storage nonce = _nonces[owner]; current = nonce.current(); nonce.increment(); }}

File 8 of 34 : IERC20Metadata.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)pragma solidity ^0.8.0;import "../IERC20.sol";/** * @dev Interface for the optional metadata functions from the ERC20 standard. * * _Available since v4.1._ */interface IERC20Metadata is IERC20 { /** * @dev Returns the name of the token. */ function name() external view returns (string memory); /** * @dev Returns the symbol of the token. */ function symbol() external view returns (string memory); /** * @dev Returns the decimals places of the token. */ function decimals() external view returns (uint8);}

File 9 of 34 : IERC20Permit.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/extensions/IERC20Permit.sol)pragma solidity ^0.8.0;/** * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612]. * * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't * need to send a transaction, and thus is not required to hold Ether at all. */interface IERC20Permit { /** * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens, * given ``owner``'s signed approval. * * IMPORTANT: The same issues {IERC20-approve} has related to transaction * ordering also apply here. * * Emits an {Approval} event. * * Requirements: * * - `spender` cannot be the zero address. * - `deadline` must be a timestamp in the future. * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner` * over the EIP712-formatted function arguments. * - the signature must use ``owner``'s current nonce (see {nonces}). * * For more information on the signature format, see the * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP * section]. */ function permit( address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s ) external; /** * @dev Returns the current nonce for `owner`. This value must be * included whenever a signature is generated for {permit}. * * Every successful call to {permit} increases ``owner``'s nonce by one. This * prevents a signature from being used multiple times. */ function nonces(address owner) external view returns (uint256); /** * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}. */ // solhint-disable-next-line func-name-mixedcase function DOMAIN_SEPARATOR() external view returns (bytes32);}

File 10 of 34 : IERC20.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)pragma solidity ^0.8.0;/** * @dev Interface of the ERC20 standard as defined in the EIP. */interface IERC20 { /** * @dev Emitted when `value` tokens are moved from one account (`from`) to * another (`to`). * * Note that `value` may be zero. */ event Transfer(address indexed from, address indexed to, uint256 value); /** * @dev Emitted when the allowance of a `spender` for an `owner` is set by * a call to {approve}. `value` is the new allowance. */ event Approval(address indexed owner, address indexed spender, uint256 value); /** * @dev Returns the amount of tokens in existence. */ function totalSupply() external view returns (uint256); /** * @dev Returns the amount of tokens owned by `account`. */ function balanceOf(address account) external view returns (uint256); /** * @dev Moves `amount` tokens from the caller's account to `to`. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transfer(address to, uint256 amount) external returns (bool); /** * @dev Returns the remaining number of tokens that `spender` will be * allowed to spend on behalf of `owner` through {transferFrom}. This is * zero by default. * * This value changes when {approve} or {transferFrom} are called. */ function allowance(address owner, address spender) external view returns (uint256); /** * @dev Sets `amount` as the allowance of `spender` over the caller's tokens. * * Returns a boolean value indicating whether the operation succeeded. * * IMPORTANT: Beware that changing an allowance with this method brings the risk * that someone may use both the old and the new allowance by unfortunate * transaction ordering. One possible solution to mitigate this race * condition is to first reduce the spender's allowance to 0 and set the * desired value afterwards: * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729 * * Emits an {Approval} event. */ function approve(address spender, uint256 amount) external returns (bool); /** * @dev Moves `amount` tokens from `from` to `to` using the * allowance mechanism. `amount` is then deducted from the caller's * allowance. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transferFrom(address from, address to, uint256 amount) external returns (bool);}

File 11 of 34 : SafeERC20.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.9.3) (token/ERC20/utils/SafeERC20.sol)pragma solidity ^0.8.0;import "../IERC20.sol";import "../extensions/IERC20Permit.sol";import "../../../utils/Address.sol";/** * @title SafeERC20 * @dev Wrappers around ERC20 operations that throw on failure (when the token * contract returns false). Tokens that return no value (and instead revert or * throw on failure) are also supported, non-reverting calls are assumed to be * successful. * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract, * which allows you to call the safe operations as `token.safeTransfer(...)`, etc. */library SafeERC20 { using Address for address; /** * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value, * non-reverting calls are assumed to be successful. */ function safeTransfer(IERC20 token, address to, uint256 value) internal { _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value)); } /** * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful. */ function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal { _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value)); } /** * @dev Deprecated. This function has issues similar to the ones found in * {IERC20-approve}, and its usage is discouraged. * * Whenever possible, use {safeIncreaseAllowance} and * {safeDecreaseAllowance} instead. */ function safeApprove(IERC20 token, address spender, uint256 value) internal { // safeApprove should only be called when setting an initial allowance, // or when resetting it to zero. To increase and decrease it, use // 'safeIncreaseAllowance' and 'safeDecreaseAllowance' require( (value == 0) || (token.allowance(address(this), spender) == 0), "SafeERC20: approve from non-zero to non-zero allowance" ); _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value)); } /** * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value, * non-reverting calls are assumed to be successful. */ function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal { uint256 oldAllowance = token.allowance(address(this), spender); _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value)); } /** * @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value, * non-reverting calls are assumed to be successful. */ function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal { unchecked { uint256 oldAllowance = token.allowance(address(this), spender); require(oldAllowance >= value, "SafeERC20: decreased allowance below zero"); _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value)); } } /** * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value, * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval * to be set to zero before setting it to a non-zero value, such as USDT. */ function forceApprove(IERC20 token, address spender, uint256 value) internal { bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value); if (!_callOptionalReturnBool(token, approvalCall)) { _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0)); _callOptionalReturn(token, approvalCall); } } /** * @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`. * Revert on invalid signature. */ function safePermit( IERC20Permit token, address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s ) internal { uint256 nonceBefore = token.nonces(owner); token.permit(owner, spender, value, deadline, v, r, s); uint256 nonceAfter = token.nonces(owner); require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed"); } /** * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement * on the return value: the return value is optional (but if data is returned, it must not be false). * @param token The token targeted by the call. * @param data The call data (encoded using abi.encode or one of its variants). */ function _callOptionalReturn(IERC20 token, bytes memory data) private { // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that // the target address contains contract code and also asserts for success in the low-level call. bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed"); require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed"); } /** * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement * on the return value: the return value is optional (but if data is returned, it must not be false). * @param token The token targeted by the call. * @param data The call data (encoded using abi.encode or one of its variants). * * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead. */ function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) { // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false // and not revert is the subcall reverts. (bool success, bytes memory returndata) = address(token).call(data); return success && (returndata.length == 0 || abi.decode(returndata, (bool))) && Address.isContract(address(token)); }}

File 12 of 34 : Address.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)pragma solidity ^0.8.1;/** * @dev Collection of functions related to the address type */library Address { /** * @dev Returns true if `account` is a contract. * * [IMPORTANT] * ==== * It is unsafe to assume that an address for which this function returns * false is an externally-owned account (EOA) and not a contract. * * Among others, `isContract` will return false for the following * types of addresses: * * - an externally-owned account * - a contract in construction * - an address where a contract will be created * - an address where a contract lived, but was destroyed * * Furthermore, `isContract` will also return true if the target contract within * the same transaction is already scheduled for destruction by `SELFDESTRUCT`, * which only has an effect at the end of a transaction. * ==== * * [IMPORTANT] * ==== * You shouldn't rely on `isContract` to protect against flash loan attacks! * * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract * constructor. * ==== */ function isContract(address account) internal view returns (bool) { // This method relies on extcodesize/address.code.length, which returns 0 // for contracts in construction, since the code is only stored at the end // of the constructor execution. return account.code.length > 0; } /** * @dev Replacement for Solidity's `transfer`: sends `amount` wei to * `recipient`, forwarding all available gas and reverting on errors. * * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost * of certain opcodes, possibly making contracts go over the 2300 gas limit * imposed by `transfer`, making them unable to receive funds via * `transfer`. {sendValue} removes this limitation. * * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more]. * * IMPORTANT: because control is transferred to `recipient`, care must be * taken to not create reentrancy vulnerabilities. Consider using * {ReentrancyGuard} or the * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern]. */ function sendValue(address payable recipient, uint256 amount) internal { require(address(this).balance >= amount, "Address: insufficient balance"); (bool success, ) = recipient.call{value: amount}(""); require(success, "Address: unable to send value, recipient may have reverted"); } /** * @dev Performs a Solidity function call using a low level `call`. A * plain `call` is an unsafe replacement for a function call: use this * function instead. * * If `target` reverts with a revert reason, it is bubbled up by this * function (like regular Solidity function calls). * * Returns the raw returned data. To convert to the expected return value, * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`]. * * Requirements: * * - `target` must be a contract. * - calling `target` with `data` must not revert. * * _Available since v3.1._ */ function functionCall(address target, bytes memory data) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, "Address: low-level call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with * `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCall( address target, bytes memory data, string memory errorMessage ) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but also transferring `value` wei to `target`. * * Requirements: * * - the calling contract must have an ETH balance of at least `value`. * - the called Solidity function must be `payable`. * * _Available since v3.1._ */ function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) { return functionCallWithValue(target, data, value, "Address: low-level call with value failed"); } /** * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but * with `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value, string memory errorMessage ) internal returns (bytes memory) { require(address(this).balance >= value, "Address: insufficient balance for call"); (bool success, bytes memory returndata) = target.call{value: value}(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) { return functionStaticCall(target, data, "Address: low-level static call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall( address target, bytes memory data, string memory errorMessage ) internal view returns (bytes memory) { (bool success, bytes memory returndata) = target.staticcall(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a delegate call. * * _Available since v3.4._ */ function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) { return functionDelegateCall(target, data, "Address: low-level delegate call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`], * but performing a delegate call. * * _Available since v3.4._ */ function functionDelegateCall( address target, bytes memory data, string memory errorMessage ) internal returns (bytes memory) { (bool success, bytes memory returndata) = target.delegatecall(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract. * * _Available since v4.8._ */ function verifyCallResultFromTarget( address target, bool success, bytes memory returndata, string memory errorMessage ) internal view returns (bytes memory) { if (success) { if (returndata.length == 0) { // only check isContract if the call was successful and the return data is empty // otherwise we already know that it was a contract require(isContract(target), "Address: call to non-contract"); } return returndata; } else { _revert(returndata, errorMessage); } } /** * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the * revert reason or using the provided one. * * _Available since v4.3._ */ function verifyCallResult( bool success, bytes memory returndata, string memory errorMessage ) internal pure returns (bytes memory) { if (success) { return returndata; } else { _revert(returndata, errorMessage); } } function _revert(bytes memory returndata, string memory errorMessage) private pure { // Look for revert reason and bubble it up if present if (returndata.length > 0) { // The easiest way to bubble the revert reason is using memory via assembly /// @solidity memory-safe-assembly assembly { let returndata_size := mload(returndata) revert(add(32, returndata), returndata_size) } } else { revert(errorMessage); } }}

File 13 of 34 : Context.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)pragma solidity ^0.8.0;/** * @dev Provides information about the current execution context, including the * sender of the transaction and its data. While these are generally available * via msg.sender and msg.data, they should not be accessed in such a direct * manner, since when dealing with meta-transactions the account sending and * paying for execution may not be the actual sender (as far as an application * is concerned). * * This contract is only required for intermediate, library-like contracts. */abstract contract Context { function _msgSender() internal view virtual returns (address) { return msg.sender; } function _msgData() internal view virtual returns (bytes calldata) { return msg.data; }}

File 14 of 34 : Counters.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts v4.4.1 (utils/Counters.sol)pragma solidity ^0.8.0;/** * @title Counters * @author Matt Condon (@shrugs) * @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number * of elements in a mapping, issuing ERC721 ids, or counting request ids. * * Include with `using Counters for Counters.Counter;` */library Counters { struct Counter { // This variable should never be directly accessed by users of the library: interactions must be restricted to // the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add // this feature: see https://github.com/ethereum/solidity/issues/4637 uint256 _value; // default: 0 } function current(Counter storage counter) internal view returns (uint256) { return counter._value; } function increment(Counter storage counter) internal { unchecked { counter._value += 1; } } function decrement(Counter storage counter) internal { uint256 value = counter._value; require(value > 0, "Counter: decrement overflow"); unchecked { counter._value = value - 1; } } function reset(Counter storage counter) internal { counter._value = 0; }}

File 15 of 34 : draft-EIP712.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.8.0) (utils/cryptography/draft-EIP712.sol)pragma solidity ^0.8.0;// EIP-712 is Final as of 2022-08-11. This file is deprecated.import "./EIP712.sol";

File 16 of 34 : ECDSA.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.9.0) (utils/cryptography/ECDSA.sol)pragma solidity ^0.8.0;import "../Strings.sol";/** * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations. * * These functions can be used to verify that a message was signed by the holder * of the private keys of a given address. */library ECDSA { enum RecoverError { NoError, InvalidSignature, InvalidSignatureLength, InvalidSignatureS, InvalidSignatureV // Deprecated in v4.8 } function _throwError(RecoverError error) private pure { if (error == RecoverError.NoError) { return; // no error: do nothing } else if (error == RecoverError.InvalidSignature) { revert("ECDSA: invalid signature"); } else if (error == RecoverError.InvalidSignatureLength) { revert("ECDSA: invalid signature length"); } else if (error == RecoverError.InvalidSignatureS) { revert("ECDSA: invalid signature 's' value"); } } /** * @dev Returns the address that signed a hashed message (`hash`) with * `signature` or error string. This address can then be used for verification purposes. * * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures: * this function rejects them by requiring the `s` value to be in the lower * half order, and the `v` value to be either 27 or 28. * * IMPORTANT: `hash` _must_ be the result of a hash operation for the * verification to be secure: it is possible to craft signatures that * recover to arbitrary addresses for non-hashed data. A safe way to ensure * this is by receiving a hash of the original message (which may otherwise * be too long), and then calling {toEthSignedMessageHash} on it. * * Documentation for signature generation: * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js] * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers] * * _Available since v4.3._ */ function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) { if (signature.length == 65) { bytes32 r; bytes32 s; uint8 v; // ecrecover takes the signature parameters, and the only way to get them // currently is to use assembly. /// @solidity memory-safe-assembly assembly { r := mload(add(signature, 0x20)) s := mload(add(signature, 0x40)) v := byte(0, mload(add(signature, 0x60))) } return tryRecover(hash, v, r, s); } else { return (address(0), RecoverError.InvalidSignatureLength); } } /** * @dev Returns the address that signed a hashed message (`hash`) with * `signature`. This address can then be used for verification purposes. * * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures: * this function rejects them by requiring the `s` value to be in the lower * half order, and the `v` value to be either 27 or 28. * * IMPORTANT: `hash` _must_ be the result of a hash operation for the * verification to be secure: it is possible to craft signatures that * recover to arbitrary addresses for non-hashed data. A safe way to ensure * this is by receiving a hash of the original message (which may otherwise * be too long), and then calling {toEthSignedMessageHash} on it. */ function recover(bytes32 hash, bytes memory signature) internal pure returns (address) { (address recovered, RecoverError error) = tryRecover(hash, signature); _throwError(error); return recovered; } /** * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately. * * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures] * * _Available since v4.3._ */ function tryRecover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address, RecoverError) { bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff); uint8 v = uint8((uint256(vs) >> 255) + 27); return tryRecover(hash, v, r, s); } /** * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately. * * _Available since v4.2._ */ function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) { (address recovered, RecoverError error) = tryRecover(hash, r, vs); _throwError(error); return recovered; } /** * @dev Overload of {ECDSA-tryRecover} that receives the `v`, * `r` and `s` signature fields separately. * * _Available since v4.3._ */ function tryRecover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address, RecoverError) { // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most // signatures from current libraries generate a unique signature with an s-value in the lower half order. // // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept // these malleable signatures as well. if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) { return (address(0), RecoverError.InvalidSignatureS); } // If the signature is valid (and not malleable), return the signer address address signer = ecrecover(hash, v, r, s); if (signer == address(0)) { return (address(0), RecoverError.InvalidSignature); } return (signer, RecoverError.NoError); } /** * @dev Overload of {ECDSA-recover} that receives the `v`, * `r` and `s` signature fields separately. */ function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) { (address recovered, RecoverError error) = tryRecover(hash, v, r, s); _throwError(error); return recovered; } /** * @dev Returns an Ethereum Signed Message, created from a `hash`. This * produces hash corresponding to the one signed with the * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`] * JSON-RPC method as part of EIP-191. * * See {recover}. */ function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32 message) { // 32 is the length in bytes of hash, // enforced by the type signature above /// @solidity memory-safe-assembly assembly { mstore(0x00, "\x19Ethereum Signed Message:\n32") mstore(0x1c, hash) message := keccak256(0x00, 0x3c) } } /** * @dev Returns an Ethereum Signed Message, created from `s`. This * produces hash corresponding to the one signed with the * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`] * JSON-RPC method as part of EIP-191. * * See {recover}. */ function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) { return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s)); } /** * @dev Returns an Ethereum Signed Typed Data, created from a * `domainSeparator` and a `structHash`. This produces hash corresponding * to the one signed with the * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`] * JSON-RPC method as part of EIP-712. * * See {recover}. */ function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 data) { /// @solidity memory-safe-assembly assembly { let ptr := mload(0x40) mstore(ptr, "\x19\x01") mstore(add(ptr, 0x02), domainSeparator) mstore(add(ptr, 0x22), structHash) data := keccak256(ptr, 0x42) } } /** * @dev Returns an Ethereum Signed Data with intended validator, created from a * `validator` and `data` according to the version 0 of EIP-191. * * See {recover}. */ function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) { return keccak256(abi.encodePacked("\x19\x00", validator, data)); }}

File 17 of 34 : EIP712.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.9.0) (utils/cryptography/EIP712.sol)pragma solidity ^0.8.8;import "./ECDSA.sol";import "../ShortStrings.sol";import "../../interfaces/IERC5267.sol";/** * @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data. * * The encoding specified in the EIP is very generic, and such a generic implementation in Solidity is not feasible, * thus this contract does not implement the encoding itself. Protocols need to implement the type-specific encoding * they need in their contracts using a combination of `abi.encode` and `keccak256`. * * This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA * ({_hashTypedDataV4}). * * The implementation of the domain separator was designed to be as efficient as possible while still properly updating * the chain id to protect against replay attacks on an eventual fork of the chain. * * NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask]. * * NOTE: In the upgradeable version of this contract, the cached values will correspond to the address, and the domain * separator of the implementation contract. This will cause the `_domainSeparatorV4` function to always rebuild the * separator from the immutable values, which is cheaper than accessing a cached version in cold storage. * * _Available since v3.4._ * * @custom:oz-upgrades-unsafe-allow state-variable-immutable state-variable-assignment */abstract contract EIP712 is IERC5267 { using ShortStrings for *; bytes32 private constant _TYPE_HASH = keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"); // Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to // invalidate the cached domain separator if the chain id changes. bytes32 private immutable _cachedDomainSeparator; uint256 private immutable _cachedChainId; address private immutable _cachedThis; bytes32 private immutable _hashedName; bytes32 private immutable _hashedVersion; ShortString private immutable _name; ShortString private immutable _version; string private _nameFallback; string private _versionFallback; /** * @dev Initializes the domain separator and parameter caches. * * The meaning of `name` and `version` is specified in * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]: * * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol. * - `version`: the current major version of the signing domain. * * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart * contract upgrade]. */ constructor(string memory name, string memory version) { _name = name.toShortStringWithFallback(_nameFallback); _version = version.toShortStringWithFallback(_versionFallback); _hashedName = keccak256(bytes(name)); _hashedVersion = keccak256(bytes(version)); _cachedChainId = block.chainid; _cachedDomainSeparator = _buildDomainSeparator(); _cachedThis = address(this); } /** * @dev Returns the domain separator for the current chain. */ function _domainSeparatorV4() internal view returns (bytes32) { if (address(this) == _cachedThis && block.chainid == _cachedChainId) { return _cachedDomainSeparator; } else { return _buildDomainSeparator(); } } function _buildDomainSeparator() private view returns (bytes32) { return keccak256(abi.encode(_TYPE_HASH, _hashedName, _hashedVersion, block.chainid, address(this))); } /** * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this * function returns the hash of the fully encoded EIP712 message for this domain. * * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example: * * ```solidity * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode( * keccak256("Mail(address to,string contents)"), * mailTo, * keccak256(bytes(mailContents)) * ))); * address signer = ECDSA.recover(digest, signature); * ``` */ function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) { return ECDSA.toTypedDataHash(_domainSeparatorV4(), structHash); } /** * @dev See {EIP-5267}. * * _Available since v4.9._ */ function eip712Domain() public view virtual override returns ( bytes1 fields, string memory name, string memory version, uint256 chainId, address verifyingContract, bytes32 salt, uint256[] memory extensions ) { return ( hex"0f", // 01111 _name.toStringWithFallback(_nameFallback), _version.toStringWithFallback(_versionFallback), block.chainid, address(this), bytes32(0), new uint256[](0) ); }}

File 18 of 34 : Math.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.9.0) (utils/math/Math.sol)pragma solidity ^0.8.0;/** * @dev Standard math utilities missing in the Solidity language. */library Math { enum Rounding { Down, // Toward negative infinity Up, // Toward infinity Zero // Toward zero } /** * @dev Returns the largest of two numbers. */ function max(uint256 a, uint256 b) internal pure returns (uint256) { return a > b ? a : b; } /** * @dev Returns the smallest of two numbers. */ function min(uint256 a, uint256 b) internal pure returns (uint256) { return a < b ? a : b; } /** * @dev Returns the average of two numbers. The result is rounded towards * zero. */ function average(uint256 a, uint256 b) internal pure returns (uint256) { // (a + b) / 2 can overflow. return (a & b) + (a ^ b) / 2; } /** * @dev Returns the ceiling of the division of two numbers. * * This differs from standard division with `/` in that it rounds up instead * of rounding down. */ function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) { // (a + b - 1) / b can overflow on addition, so we distribute. return a == 0 ? 0 : (a - 1) / b + 1; } /** * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0 * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) * with further edits by Uniswap Labs also under MIT license. */ function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) { unchecked { // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256 // variables such that product = prod1 * 2^256 + prod0. uint256 prod0; // Least significant 256 bits of the product uint256 prod1; // Most significant 256 bits of the product assembly { let mm := mulmod(x, y, not(0)) prod0 := mul(x, y) prod1 := sub(sub(mm, prod0), lt(mm, prod0)) } // Handle non-overflow cases, 256 by 256 division. if (prod1 == 0) { // Solidity will revert if denominator == 0, unlike the div opcode on its own. // The surrounding unchecked block does not change this fact. // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic. return prod0 / denominator; } // Make sure the result is less than 2^256. Also prevents denominator == 0. require(denominator > prod1, "Math: mulDiv overflow"); /////////////////////////////////////////////// // 512 by 256 division. /////////////////////////////////////////////// // Make division exact by subtracting the remainder from [prod1 prod0]. uint256 remainder; assembly { // Compute remainder using mulmod. remainder := mulmod(x, y, denominator) // Subtract 256 bit number from 512 bit number. prod1 := sub(prod1, gt(remainder, prod0)) prod0 := sub(prod0, remainder) } // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1. // See https://cs.stackexchange.com/q/138556/92363. // Does not overflow because the denominator cannot be zero at this stage in the function. uint256 twos = denominator & (~denominator + 1); assembly { // Divide denominator by twos. denominator := div(denominator, twos) // Divide [prod1 prod0] by twos. prod0 := div(prod0, twos) // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one. twos := add(div(sub(0, twos), twos), 1) } // Shift in bits from prod1 into prod0. prod0 |= prod1 * twos; // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for // four bits. That is, denominator * inv = 1 mod 2^4. uint256 inverse = (3 * denominator) ^ 2; // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works // in modular arithmetic, doubling the correct bits in each step. inverse *= 2 - denominator * inverse; // inverse mod 2^8 inverse *= 2 - denominator * inverse; // inverse mod 2^16 inverse *= 2 - denominator * inverse; // inverse mod 2^32 inverse *= 2 - denominator * inverse; // inverse mod 2^64 inverse *= 2 - denominator * inverse; // inverse mod 2^128 inverse *= 2 - denominator * inverse; // inverse mod 2^256 // Because the division is now exact we can divide by multiplying with the modular inverse of denominator. // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1 // is no longer required. result = prod0 * inverse; return result; } } /** * @notice Calculates x * y / denominator with full precision, following the selected rounding direction. */ function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) { uint256 result = mulDiv(x, y, denominator); if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) { result += 1; } return result; } /** * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down. * * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11). */ function sqrt(uint256 a) internal pure returns (uint256) { if (a == 0) { return 0; } // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target. // // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`. // // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)` // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))` // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)` // // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit. uint256 result = 1 << (log2(a) >> 1); // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128, // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision // into the expected uint128 result. unchecked { result = (result + a / result) >> 1; result = (result + a / result) >> 1; result = (result + a / result) >> 1; result = (result + a / result) >> 1; result = (result + a / result) >> 1; result = (result + a / result) >> 1; result = (result + a / result) >> 1; return min(result, a / result); } } /** * @notice Calculates sqrt(a), following the selected rounding direction. */ function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) { unchecked { uint256 result = sqrt(a); return result + (rounding == Rounding.Up && result * result < a ? 1 : 0); } } /** * @dev Return the log in base 2, rounded down, of a positive value. * Returns 0 if given 0. */ function log2(uint256 value) internal pure returns (uint256) { uint256 result = 0; unchecked { if (value >> 128 > 0) { value >>= 128; result += 128; } if (value >> 64 > 0) { value >>= 64; result += 64; } if (value >> 32 > 0) { value >>= 32; result += 32; } if (value >> 16 > 0) { value >>= 16; result += 16; } if (value >> 8 > 0) { value >>= 8; result += 8; } if (value >> 4 > 0) { value >>= 4; result += 4; } if (value >> 2 > 0) { value >>= 2; result += 2; } if (value >> 1 > 0) { result += 1; } } return result; } /** * @dev Return the log in base 2, following the selected rounding direction, of a positive value. * Returns 0 if given 0. */ function log2(uint256 value, Rounding rounding) internal pure returns (uint256) { unchecked { uint256 result = log2(value); return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0); } } /** * @dev Return the log in base 10, rounded down, of a positive value. * Returns 0 if given 0. */ function log10(uint256 value) internal pure returns (uint256) { uint256 result = 0; unchecked { if (value >= 10 ** 64) { value /= 10 ** 64; result += 64; } if (value >= 10 ** 32) { value /= 10 ** 32; result += 32; } if (value >= 10 ** 16) { value /= 10 ** 16; result += 16; } if (value >= 10 ** 8) { value /= 10 ** 8; result += 8; } if (value >= 10 ** 4) { value /= 10 ** 4; result += 4; } if (value >= 10 ** 2) { value /= 10 ** 2; result += 2; } if (value >= 10 ** 1) { result += 1; } } return result; } /** * @dev Return the log in base 10, following the selected rounding direction, of a positive value. * Returns 0 if given 0. */ function log10(uint256 value, Rounding rounding) internal pure returns (uint256) { unchecked { uint256 result = log10(value); return result + (rounding == Rounding.Up && 10 ** result < value ? 1 : 0); } } /** * @dev Return the log in base 256, rounded down, of a positive value. * Returns 0 if given 0. * * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string. */ function log256(uint256 value) internal pure returns (uint256) { uint256 result = 0; unchecked { if (value >> 128 > 0) { value >>= 128; result += 16; } if (value >> 64 > 0) { value >>= 64; result += 8; } if (value >> 32 > 0) { value >>= 32; result += 4; } if (value >> 16 > 0) { value >>= 16; result += 2; } if (value >> 8 > 0) { result += 1; } } return result; } /** * @dev Return the log in base 256, following the selected rounding direction, of a positive value. * Returns 0 if given 0. */ function log256(uint256 value, Rounding rounding) internal pure returns (uint256) { unchecked { uint256 result = log256(value); return result + (rounding == Rounding.Up && 1 << (result << 3) < value ? 1 : 0); } }}

File 19 of 34 : SignedMath.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SignedMath.sol)pragma solidity ^0.8.0;/** * @dev Standard signed math utilities missing in the Solidity language. */library SignedMath { /** * @dev Returns the largest of two signed numbers. */ function max(int256 a, int256 b) internal pure returns (int256) { return a > b ? a : b; } /** * @dev Returns the smallest of two signed numbers. */ function min(int256 a, int256 b) internal pure returns (int256) { return a < b ? a : b; } /** * @dev Returns the average of two signed numbers without overflow. * The result is rounded towards zero. */ function average(int256 a, int256 b) internal pure returns (int256) { // Formula from the book "Hacker's Delight" int256 x = (a & b) + ((a ^ b) >> 1); return x + (int256(uint256(x) >> 255) & (a ^ b)); } /** * @dev Returns the absolute unsigned value of a signed value. */ function abs(int256 n) internal pure returns (uint256) { unchecked { // must be unchecked in order to support `n = type(int256).min` return uint256(n >= 0 ? n : -n); } }}

File 20 of 34 : ShortStrings.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.9.0) (utils/ShortStrings.sol)pragma solidity ^0.8.8;import "./StorageSlot.sol";// | string | 0xAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA |// | length | 0x BB |type ShortString is bytes32;/** * @dev This library provides functions to convert short memory strings * into a `ShortString` type that can be used as an immutable variable. * * Strings of arbitrary length can be optimized using this library if * they are short enough (up to 31 bytes) by packing them with their * length (1 byte) in a single EVM word (32 bytes). Additionally, a * fallback mechanism can be used for every other case. * * Usage example: * * ```solidity * contract Named { * using ShortStrings for *; * * ShortString private immutable _name; * string private _nameFallback; * * constructor(string memory contractName) { * _name = contractName.toShortStringWithFallback(_nameFallback); * } * * function name() external view returns (string memory) { * return _name.toStringWithFallback(_nameFallback); * } * } * ``` */library ShortStrings { // Used as an identifier for strings longer than 31 bytes. bytes32 private constant _FALLBACK_SENTINEL = 0x00000000000000000000000000000000000000000000000000000000000000FF; error StringTooLong(string str); error InvalidShortString(); /** * @dev Encode a string of at most 31 chars into a `ShortString`. * * This will trigger a `StringTooLong` error is the input string is too long. */ function toShortString(string memory str) internal pure returns (ShortString) { bytes memory bstr = bytes(str); if (bstr.length > 31) { revert StringTooLong(str); } return ShortString.wrap(bytes32(uint256(bytes32(bstr)) | bstr.length)); } /** * @dev Decode a `ShortString` back to a "normal" string. */ function toString(ShortString sstr) internal pure returns (string memory) { uint256 len = byteLength(sstr); // using `new string(len)` would work locally but is not memory safe. string memory str = new string(32); /// @solidity memory-safe-assembly assembly { mstore(str, len) mstore(add(str, 0x20), sstr) } return str; } /** * @dev Return the length of a `ShortString`. */ function byteLength(ShortString sstr) internal pure returns (uint256) { uint256 result = uint256(ShortString.unwrap(sstr)) & 0xFF; if (result > 31) { revert InvalidShortString(); } return result; } /** * @dev Encode a string into a `ShortString`, or write it to storage if it is too long. */ function toShortStringWithFallback(string memory value, string storage store) internal returns (ShortString) { if (bytes(value).length < 32) { return toShortString(value); } else { StorageSlot.getStringSlot(store).value = value; return ShortString.wrap(_FALLBACK_SENTINEL); } } /** * @dev Decode a string that was encoded to `ShortString` or written to storage using {setWithFallback}. */ function toStringWithFallback(ShortString value, string storage store) internal pure returns (string memory) { if (ShortString.unwrap(value) != _FALLBACK_SENTINEL) { return toString(value); } else { return store; } } /** * @dev Return the length of a string that was encoded to `ShortString` or written to storage using {setWithFallback}. * * WARNING: This will return the "byte length" of the string. This may not reflect the actual length in terms of * actual characters as the UTF-8 encoding of a single character can span over multiple bytes. */ function byteLengthWithFallback(ShortString value, string storage store) internal view returns (uint256) { if (ShortString.unwrap(value) != _FALLBACK_SENTINEL) { return byteLength(value); } else { return bytes(store).length; } }}

File 21 of 34 : StorageSlot.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.9.0) (utils/StorageSlot.sol)// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.pragma solidity ^0.8.0;/** * @dev Library for reading and writing primitive types to specific storage slots. * * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts. * This library helps with reading and writing to such slots without the need for inline assembly. * * The functions in this library return Slot structs that contain a `value` member that can be used to read or write. * * Example usage to set ERC1967 implementation slot: * ```solidity * contract ERC1967 { * bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc; * * function _getImplementation() internal view returns (address) { * return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value; * } * * function _setImplementation(address newImplementation) internal { * require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract"); * StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation; * } * } * ``` * * _Available since v4.1 for `address`, `bool`, `bytes32`, `uint256`._ * _Available since v4.9 for `string`, `bytes`._ */library StorageSlot { struct AddressSlot { address value; } struct BooleanSlot { bool value; } struct Bytes32Slot { bytes32 value; } struct Uint256Slot { uint256 value; } struct StringSlot { string value; } struct BytesSlot { bytes value; } /** * @dev Returns an `AddressSlot` with member `value` located at `slot`. */ function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) { /// @solidity memory-safe-assembly assembly { r.slot := slot } } /** * @dev Returns an `BooleanSlot` with member `value` located at `slot`. */ function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) { /// @solidity memory-safe-assembly assembly { r.slot := slot } } /** * @dev Returns an `Bytes32Slot` with member `value` located at `slot`. */ function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) { /// @solidity memory-safe-assembly assembly { r.slot := slot } } /** * @dev Returns an `Uint256Slot` with member `value` located at `slot`. */ function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) { /// @solidity memory-safe-assembly assembly { r.slot := slot } } /** * @dev Returns an `StringSlot` with member `value` located at `slot`. */ function getStringSlot(bytes32 slot) internal pure returns (StringSlot storage r) { /// @solidity memory-safe-assembly assembly { r.slot := slot } } /** * @dev Returns an `StringSlot` representation of the string storage pointer `store`. */ function getStringSlot(string storage store) internal pure returns (StringSlot storage r) { /// @solidity memory-safe-assembly assembly { r.slot := store.slot } } /** * @dev Returns an `BytesSlot` with member `value` located at `slot`. */ function getBytesSlot(bytes32 slot) internal pure returns (BytesSlot storage r) { /// @solidity memory-safe-assembly assembly { r.slot := slot } } /** * @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`. */ function getBytesSlot(bytes storage store) internal pure returns (BytesSlot storage r) { /// @solidity memory-safe-assembly assembly { r.slot := store.slot } }}

File 22 of 34 : Strings.sol

// SPDX-License-Identifier: MIT// OpenZeppelin Contracts (last updated v4.9.0) (utils/Strings.sol)pragma solidity ^0.8.0;import "./math/Math.sol";import "./math/SignedMath.sol";/** * @dev String operations. */library Strings { bytes16 private constant _SYMBOLS = "0123456789abcdef"; uint8 private constant _ADDRESS_LENGTH = 20; /** * @dev Converts a `uint256` to its ASCII `string` decimal representation. */ function toString(uint256 value) internal pure returns (string memory) { unchecked { uint256 length = Math.log10(value) + 1; string memory buffer = new string(length); uint256 ptr; /// @solidity memory-safe-assembly assembly { ptr := add(buffer, add(32, length)) } while (true) { ptr--; /// @solidity memory-safe-assembly assembly { mstore8(ptr, byte(mod(value, 10), _SYMBOLS)) } value /= 10; if (value == 0) break; } return buffer; } } /** * @dev Converts a `int256` to its ASCII `string` decimal representation. */ function toString(int256 value) internal pure returns (string memory) { return string(abi.encodePacked(value < 0 ? "-" : "", toString(SignedMath.abs(value)))); } /** * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation. */ function toHexString(uint256 value) internal pure returns (string memory) { unchecked { return toHexString(value, Math.log256(value) + 1); } } /** * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length. */ function toHexString(uint256 value, uint256 length) internal pure returns (string memory) { bytes memory buffer = new bytes(2 * length + 2); buffer[0] = "0"; buffer[1] = "x"; for (uint256 i = 2 * length + 1; i > 1; --i) { buffer[i] = _SYMBOLS[value & 0xf]; value >>= 4; } require(value == 0, "Strings: hex length insufficient"); return string(buffer); } /** * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation. */ function toHexString(address addr) internal pure returns (string memory) { return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH); } /** * @dev Returns true if the two strings are equal. */ function equal(string memory a, string memory b) internal pure returns (bool) { return keccak256(bytes(a)) == keccak256(bytes(b)); }}

File 23 of 34 : PendleERC20.sol

// SPDX-License-Identifier: GPL-3.0-or-later// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/ERC20.sol)pragma solidity ^0.8.0;import "@openzeppelin/contracts/token/ERC20/IERC20.sol";import "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol";import "@openzeppelin/contracts/utils/Context.sol";/** * @dev Pendle's ERC20 implementation, modified from @openzeppelin implementation * Changes are: * - comes with built-in reentrancy protection, storage-packed with totalSupply variable * - delete increaseAllowance / decreaseAllowance * - add nonReentrancy protection to transfer / transferFrom functions * - allow decimals to be passed in * - block self-transfer by default */// solhint-disablecontract PendleERC20 is Context, IERC20, IERC20Metadata { uint8 private constant _NOT_ENTERED = 1; uint8 private constant _ENTERED = 2; mapping(address => uint256) private _balances; mapping(address => mapping(address => uint256)) private _allowances; uint248 private _totalSupply; uint8 private _status; string private _name; string private _symbol; uint8 public immutable decimals; /** * @dev Prevents a contract from calling itself, directly or indirectly. * Calling a `nonReentrant` function from another `nonReentrant` * function is not supported. It is possible to prevent this from happening * by making the `nonReentrant` function external, and making it call a * `private` function that does the actual work. */ modifier nonReentrant() { // On the first call to nonReentrant, _notEntered will be true require(_status != _ENTERED, "ReentrancyGuard: reentrant call"); // Any calls to nonReentrant after this point will fail _status = _ENTERED; _; // By storing the original value once again, a refund is triggered (see // https://eips.ethereum.org/EIPS/eip-2200) _status = _NOT_ENTERED; } /** * @dev Sets the values for {name}, {symbol} and {decimals}. * * All three of these values are immutable: they can only be set once during * construction. */ constructor(string memory name_, string memory symbol_, uint8 decimals_) { _name = name_; _symbol = symbol_; decimals = decimals_; _status = _NOT_ENTERED; } /** * @dev Returns the name of the token. */ function name() public view virtual override returns (string memory) { return _name; } /** * @dev Returns the symbol of the token, usually a shorter version of the * name. */ function symbol() public view virtual override returns (string memory) { return _symbol; } /** * @dev See {IERC20-totalSupply}. */ function totalSupply() public view virtual override returns (uint256) { return _totalSupply; } /** * @dev See {IERC20-balanceOf}. */ function balanceOf(address account) public view virtual override returns (uint256) { return _balances[account]; } /** * @dev See {IERC20-transfer}. * * Requirements: * * - `to` cannot be the zero address. * - the caller must have a balance of at least `amount`. */ function transfer(address to, uint256 amount) external virtual override nonReentrant returns (bool) { address owner = _msgSender(); _transfer(owner, to, amount); return true; } /** * @dev See {IERC20-allowance}. */ function allowance(address owner, address spender) public view virtual override returns (uint256) { return _allowances[owner][spender]; } /** * @dev See {IERC20-approve}. * * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on * `transferFrom`. This is semantically equivalent to an infinite approval. * * Requirements: * * - `spender` cannot be the zero address. */ function approve(address spender, uint256 amount) external virtual override returns (bool) { address owner = _msgSender(); _approve(owner, spender, amount); return true; } /** * @dev See {IERC20-transferFrom}. * * Emits an {Approval} event indicating the updated allowance. This is not * required by the EIP. See the note at the beginning of {ERC20}. * * NOTE: Does not update the allowance if the current allowance * is the maximum `uint256`. * * Requirements: * * - `from` and `to` cannot be the zero address. * - `from` must have a balance of at least `amount`. * - the caller must have allowance for ``from``'s tokens of at least * `amount`. */ function transferFrom( address from, address to, uint256 amount ) external virtual override nonReentrant returns (bool) { address spender = _msgSender(); _spendAllowance(from, spender, amount); _transfer(from, to, amount); return true; } /** * @dev Moves `amount` of tokens from `sender` to `recipient`. * * This internal function is equivalent to {transfer}, and can be used to * e.g. implement automatic token fees, slashing mechanisms, etc. * * Emits a {Transfer} event. * * Requirements: * * - `from` cannot be the zero address. * - `to` cannot be the zero address. * - `from` must have a balance of at least `amount`. */ function _transfer(address from, address to, uint256 amount) internal virtual { require(from != address(0), "ERC20: transfer from the zero address"); require(to != address(0), "ERC20: transfer to the zero address"); require(from != to, "ERC20: transfer to self"); _beforeTokenTransfer(from, to, amount); uint256 fromBalance = _balances[from]; require(fromBalance >= amount, "ERC20: transfer amount exceeds balance"); unchecked { _balances[from] = fromBalance - amount; } _balances[to] += amount; emit Transfer(from, to, amount); _afterTokenTransfer(from, to, amount); } /** @dev Creates `amount` tokens and assigns them to `account`, increasing * the total supply. * * Emits a {Transfer} event with `from` set to the zero address. * * Requirements: * * - `account` cannot be the zero address. */ function _mint(address account, uint256 amount) internal virtual { require(account != address(0), "ERC20: mint to the zero address"); _beforeTokenTransfer(address(0), account, amount); _totalSupply += toUint248(amount); _balances[account] += amount; emit Transfer(address(0), account, amount); _afterTokenTransfer(address(0), account, amount); } /** * @dev Destroys `amount` tokens from `account`, reducing the * total supply. * * Emits a {Transfer} event with `to` set to the zero address. * * Requirements: * * - `account` cannot be the zero address. * - `account` must have at least `amount` tokens. */ function _burn(address account, uint256 amount) internal virtual { require(account != address(0), "ERC20: burn from the zero address"); _beforeTokenTransfer(account, address(0), amount); uint256 accountBalance = _balances[account]; require(accountBalance >= amount, "ERC20: burn amount exceeds balance"); unchecked { _balances[account] = accountBalance - amount; } _totalSupply -= toUint248(amount); emit Transfer(account, address(0), amount); _afterTokenTransfer(account, address(0), amount); } /** * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens. * * This internal function is equivalent to `approve`, and can be used to * e.g. set automatic allowances for certain subsystems, etc. * * Emits an {Approval} event. * * Requirements: * * - `owner` cannot be the zero address. * - `spender` cannot be the zero address. */ function _approve(address owner, address spender, uint256 amount) internal virtual { require(owner != address(0), "ERC20: approve from the zero address"); require(spender != address(0), "ERC20: approve to the zero address"); _allowances[owner][spender] = amount; emit Approval(owner, spender, amount); } /** * @dev Updates `owner` s allowance for `spender` based on spent `amount`. * * Does not update the allowance amount in case of infinite allowance. * Revert if not enough allowance is available. * * Might emit an {Approval} event. */ function _spendAllowance(address owner, address spender, uint256 amount) internal virtual { uint256 currentAllowance = allowance(owner, spender); if (currentAllowance != type(uint256).max) { require(currentAllowance >= amount, "ERC20: insufficient allowance"); unchecked { _approve(owner, spender, currentAllowance - amount); } } } /** * @dev Hook that is called before any transfer of tokens. This includes * minting and burning. * * Calling conditions: * * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens * will be transferred to `to`. * - when `from` is zero, `amount` tokens will be minted for `to`. * - when `to` is zero, `amount` of ``from``'s tokens will be burned. * - `from` and `to` are never both zero. * * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks]. */ function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual {} /** * @dev Hook that is called after any transfer of tokens. This includes * minting and burning. * * Calling conditions: * * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens * has been transferred to `to`. * - when `from` is zero, `amount` tokens have been minted for `to`. * - when `to` is zero, `amount` of ``from``'s tokens have been burned. * - `from` and `to` are never both zero. * * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks]. */ function _afterTokenTransfer(address from, address to, uint256 amount) internal virtual {} function toUint248(uint256 x) internal virtual returns (uint248) { require(x <= type(uint248).max); // signed, lim = bit-1 return uint248(x); }}

File 24 of 34 : PendleERC20Permit.sol

// SPDX-License-Identifier: GPL-3.0-or-later// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/ERC20.sol)pragma solidity ^0.8.0;import "./PendleERC20.sol";import "@openzeppelin/contracts/token/ERC20/IERC20.sol";import "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol";import "@openzeppelin/contracts/utils/Context.sol";import "@openzeppelin/contracts/token/ERC20/extensions/draft-ERC20Permit.sol";import "@openzeppelin/contracts/utils/cryptography/draft-EIP712.sol";import "@openzeppelin/contracts/utils/cryptography/ECDSA.sol";import "@openzeppelin/contracts/utils/Counters.sol";/// @dev forked from OZ's ERC20Permitcontract PendleERC20Permit is PendleERC20, IERC20Permit, EIP712 { using Counters for Counters.Counter; mapping(address => Counters.Counter) private _nonces; // solhint-disable-next-line var-name-mixedcase bytes32 private constant _PERMIT_TYPEHASH = keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)"); constructor( string memory name_, string memory symbol_, uint8 decimals_ ) PendleERC20(name_, symbol_, decimals_) EIP712(name_, "1") {} /** * @dev See {IERC20Permit-permit}. */ function permit( address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s ) public virtual override { require(block.timestamp <= deadline, "ERC20Permit: expired deadline"); bytes32 structHash = keccak256(abi.encode(_PERMIT_TYPEHASH, owner, spender, value, _useNonce(owner), deadline)); bytes32 hash = _hashTypedDataV4(structHash); address signer = ECDSA.recover(hash, v, r, s); require(signer == owner, "ERC20Permit: invalid signature"); _approve(owner, spender, value); } /** * @dev See {IERC20Permit-nonces}. */ function nonces(address owner) public view virtual override returns (uint256) { return _nonces[owner].current(); } /** * @dev See {IERC20Permit-DOMAIN_SEPARATOR}. */ // solhint-disable-next-line func-name-mixedcase function DOMAIN_SEPARATOR() external view override returns (bytes32) { return _domainSeparatorV4(); } /** * @dev "Consume a nonce": return the current value and increment. * * _Available since v4.1._ */ function _useNonce(address owner) internal virtual returns (uint256 current) { Counters.Counter storage nonce = _nonces[owner]; current = nonce.current(); nonce.increment(); }}

File 25 of 34 : ArrayLib.sol

// SPDX-License-Identifier: GPL-3.0-or-laterpragma solidity ^0.8.0;library ArrayLib { function sum(uint256[] memory input) internal pure returns (uint256) { uint256 value = 0; for (uint256 i = 0; i < input.length; ) { value += input[i]; unchecked { i++; } } return value; } /// @notice return index of the element if found, else return uint256.max function find(address[] memory array, address element) internal pure returns (uint256 index) { uint256 length = array.length; for (uint256 i = 0; i < length; ) { if (array[i] == element) return i; unchecked { i++; } } return type(uint256).max; } function append(address[] memory inp, address element) internal pure returns (address[] memory out) { uint256 length = inp.length; out = new address[](length + 1); for (uint256 i = 0; i < length; ) { out[i] = inp[i]; unchecked { i++; } } out[length] = element; } function appendHead(address[] memory inp, address element) internal pure returns (address[] memory out) { uint256 length = inp.length; out = new address[](length + 1); out[0] = element; for (uint256 i = 1; i <= length; ) { out[i] = inp[i - 1]; unchecked { i++; } } } /** * @dev This function assumes a and b each contains unidentical elements * @param a array of addresses a * @param b array of addresses b * @return out Concatenation of a and b containing unidentical elements */ function merge(address[] memory a, address[] memory b) internal pure returns (address[] memory out) { unchecked { uint256 countUnidenticalB = 0; bool[] memory isUnidentical = new bool[](b.length); for (uint256 i = 0; i < b.length; ++i) { if (!contains(a, b[i])) { countUnidenticalB++; isUnidentical[i] = true; } } out = new address[](a.length + countUnidenticalB); for (uint256 i = 0; i < a.length; ++i) { out[i] = a[i]; } uint256 id = a.length; for (uint256 i = 0; i < b.length; ++i) { if (isUnidentical[i]) { out[id++] = b[i]; } } } } // various version of contains function contains(address[] memory array, address element) internal pure returns (bool) { uint256 length = array.length; for (uint256 i = 0; i < length; ) { if (array[i] == element) return true; unchecked { i++; } } return false; } function contains(bytes4[] memory array, bytes4 element) internal pure returns (bool) { uint256 length = array.length; for (uint256 i = 0; i < length; ) { if (array[i] == element) return true; unchecked { i++; } } return false; } function create(address a) internal pure returns (address[] memory res) { res = new address[](1); res[0] = a; } function create(address a, address b) internal pure returns (address[] memory res) { res = new address[](2); res[0] = a; res[1] = b; } function create(address a, address b, address c) internal pure returns (address[] memory res) { res = new address[](3); res[0] = a; res[1] = b; res[2] = c; } function create(uint256 a) internal pure returns (uint256[] memory res) { res = new uint256[](1); res[0] = a; }}

File 26 of 34 : BoringOwnableUpgradeable.sol

// SPDX-License-Identifier: GPL-3.0-or-laterpragma solidity ^0.8.0;import "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol";contract BoringOwnableUpgradeableData { address public owner; address public pendingOwner;}abstract contract BoringOwnableUpgradeable is BoringOwnableUpgradeableData, Initializable { event OwnershipTransferred(address indexed previousOwner, address indexed newOwner); function __BoringOwnable_init() internal onlyInitializing { owner = msg.sender; } /// @notice Transfers ownership to `newOwner`. Either directly or claimable by the new pending owner. /// Can only be invoked by the current `owner`. /// @param newOwner Address of the new owner. /// @param direct True if `newOwner` should be set immediately. False if `newOwner` needs to use `claimOwnership`. /// @param renounce Allows the `newOwner` to be `address(0)` if `direct` and `renounce` is True. Has no effect otherwise. function transferOwnership(address newOwner, bool direct, bool renounce) public onlyOwner { if (direct) { // Checks require(newOwner != address(0) || renounce, "Ownable: zero address"); // Effects emit OwnershipTransferred(owner, newOwner); owner = newOwner; pendingOwner = address(0); } else { // Effects pendingOwner = newOwner; } } /// @notice Needs to be called by `pendingOwner` to claim ownership. function claimOwnership() public { address _pendingOwner = pendingOwner; // Checks require(msg.sender == _pendingOwner, "Ownable: caller != pending owner"); // Effects emit OwnershipTransferred(owner, _pendingOwner); owner = _pendingOwner; pendingOwner = address(0); } /// @notice Only allows the `owner` to execute the function. modifier onlyOwner() { require(msg.sender == owner, "Ownable: caller is not the owner"); _; } uint256[48] private __gap;}

File 27 of 34 : Errors.sol

// SPDX-License-Identifier: GPL-3.0-or-laterpragma solidity ^0.8.0;library Errors { // BulkSeller error BulkInsufficientSyForTrade(uint256 currentAmount, uint256 requiredAmount); error BulkInsufficientTokenForTrade(uint256 currentAmount, uint256 requiredAmount); error BulkInSufficientSyOut(uint256 actualSyOut, uint256 requiredSyOut); error BulkInSufficientTokenOut(uint256 actualTokenOut, uint256 requiredTokenOut); error BulkInsufficientSyReceived(uint256 actualBalance, uint256 requiredBalance); error BulkNotMaintainer(); error BulkNotAdmin(); error BulkSellerAlreadyExisted(address token, address SY, address bulk); error BulkSellerInvalidToken(address token, address SY); error BulkBadRateTokenToSy(uint256 actualRate, uint256 currentRate, uint256 eps); error BulkBadRateSyToToken(uint256 actualRate, uint256 currentRate, uint256 eps); // APPROX error ApproxFail(); error ApproxParamsInvalid(uint256 guessMin, uint256 guessMax, uint256 eps); error ApproxBinarySearchInputInvalid( uint256 approxGuessMin, uint256 approxGuessMax, uint256 minGuessMin, uint256 maxGuessMax ); // MARKET + MARKET MATH CORE error MarketExpired(); error MarketZeroAmountsInput(); error MarketZeroAmountsOutput(); error MarketZeroLnImpliedRate(); error MarketInsufficientPtForTrade(int256 currentAmount, int256 requiredAmount); error MarketInsufficientPtReceived(uint256 actualBalance, uint256 requiredBalance); error MarketInsufficientSyReceived(uint256 actualBalance, uint256 requiredBalance); error MarketZeroTotalPtOrTotalAsset(int256 totalPt, int256 totalAsset); error MarketExchangeRateBelowOne(int256 exchangeRate); error MarketProportionMustNotEqualOne(); error MarketRateScalarBelowZero(int256 rateScalar); error MarketScalarRootBelowZero(int256 scalarRoot); error MarketProportionTooHigh(int256 proportion, int256 maxProportion); error OracleUninitialized(); error OracleTargetTooOld(uint32 target, uint32 oldest); error OracleZeroCardinality(); error MarketFactoryExpiredPt(); error MarketFactoryInvalidPt(); error MarketFactoryMarketExists(); error MarketFactoryLnFeeRateRootTooHigh(uint80 lnFeeRateRoot, uint256 maxLnFeeRateRoot); error MarketFactoryOverriddenFeeTooHigh(uint80 overriddenFee, uint256 marketLnFeeRateRoot); error MarketFactoryReserveFeePercentTooHigh(uint8 reserveFeePercent, uint8 maxReserveFeePercent); error MarketFactoryZeroTreasury(); error MarketFactoryInitialAnchorTooLow(int256 initialAnchor, int256 minInitialAnchor); error MFNotPendleMarket(address addr); // ROUTER error RouterInsufficientLpOut(uint256 actualLpOut, uint256 requiredLpOut); error RouterInsufficientSyOut(uint256 actualSyOut, uint256 requiredSyOut); error RouterInsufficientPtOut(uint256 actualPtOut, uint256 requiredPtOut); error RouterInsufficientYtOut(uint256 actualYtOut, uint256 requiredYtOut); error RouterInsufficientPYOut(uint256 actualPYOut, uint256 requiredPYOut); error RouterInsufficientTokenOut(uint256 actualTokenOut, uint256 requiredTokenOut); error RouterInsufficientSyRepay(uint256 actualSyRepay, uint256 requiredSyRepay); error RouterInsufficientPtRepay(uint256 actualPtRepay, uint256 requiredPtRepay); error RouterNotAllSyUsed(uint256 netSyDesired, uint256 netSyUsed); error RouterTimeRangeZero(); error RouterCallbackNotPendleMarket(address caller); error RouterInvalidAction(bytes4 selector); error RouterInvalidFacet(address facet); error RouterKyberSwapDataZero(); error SimulationResults(bool success, bytes res); // YIELD CONTRACT error YCExpired(); error YCNotExpired(); error YieldContractInsufficientSy(uint256 actualSy, uint256 requiredSy); error YCNothingToRedeem(); error YCPostExpiryDataNotSet(); error YCNoFloatingSy(); // YieldFactory error YCFactoryInvalidExpiry(); error YCFactoryYieldContractExisted(); error YCFactoryZeroExpiryDivisor(); error YCFactoryZeroTreasury(); error YCFactoryInterestFeeRateTooHigh(uint256 interestFeeRate, uint256 maxInterestFeeRate); error YCFactoryRewardFeeRateTooHigh(uint256 newRewardFeeRate, uint256 maxRewardFeeRate); // SY error SYInvalidTokenIn(address token); error SYInvalidTokenOut(address token); error SYZeroDeposit(); error SYZeroRedeem(); error SYInsufficientSharesOut(uint256 actualSharesOut, uint256 requiredSharesOut); error SYInsufficientTokenOut(uint256 actualTokenOut, uint256 requiredTokenOut); // SY-specific error SYQiTokenMintFailed(uint256 errCode); error SYQiTokenRedeemFailed(uint256 errCode); error SYQiTokenRedeemRewardsFailed(uint256 rewardAccruedType0, uint256 rewardAccruedType1); error SYQiTokenBorrowRateTooHigh(uint256 borrowRate, uint256 borrowRateMax); error SYCurveInvalidPid(); error SYCurve3crvPoolNotFound(); error SYApeDepositAmountTooSmall(uint256 amountDeposited); error SYBalancerInvalidPid(); error SYInvalidRewardToken(address token); error SYStargateRedeemCapExceeded(uint256 amountLpDesired, uint256 amountLpRedeemable); error SYBalancerReentrancy(); error NotFromTrustedRemote(uint16 srcChainId, bytes path); error ApxETHNotEnoughBuffer(); // Liquidity Mining error VCInactivePool(address pool); error VCPoolAlreadyActive(address pool); error VCZeroVePendle(address user); error VCExceededMaxWeight(uint256 totalWeight, uint256 maxWeight); error VCEpochNotFinalized(uint256 wTime); error VCPoolAlreadyAddAndRemoved(address pool); error VEInvalidNewExpiry(uint256 newExpiry); error VEExceededMaxLockTime(); error VEInsufficientLockTime(); error VENotAllowedReduceExpiry(); error VEZeroAmountLocked(); error VEPositionNotExpired(); error VEZeroPosition(); error VEZeroSlope(uint128 bias, uint128 slope); error VEReceiveOldSupply(uint256 msgTime); error GCNotPendleMarket(address caller); error GCNotVotingController(address caller); error InvalidWTime(uint256 wTime); error ExpiryInThePast(uint256 expiry); error ChainNotSupported(uint256 chainId); error FDTotalAmountFundedNotMatch(uint256 actualTotalAmount, uint256 expectedTotalAmount); error FDEpochLengthMismatch(); error FDInvalidPool(address pool); error FDPoolAlreadyExists(address pool); error FDInvalidNewFinishedEpoch(uint256 oldFinishedEpoch, uint256 newFinishedEpoch); error FDInvalidStartEpoch(uint256 startEpoch); error FDInvalidWTimeFund(uint256 lastFunded, uint256 wTime); error FDFutureFunding(uint256 lastFunded, uint256 currentWTime); error BDInvalidEpoch(uint256 epoch, uint256 startTime); // Cross-Chain error MsgNotFromSendEndpoint(uint16 srcChainId, bytes path); error MsgNotFromReceiveEndpoint(address sender); error InsufficientFeeToSendMsg(uint256 currentFee, uint256 requiredFee); error ApproxDstExecutionGasNotSet(); error InvalidRetryData(); // GENERIC MSG error ArrayLengthMismatch(); error ArrayEmpty(); error ArrayOutOfBounds(); error ZeroAddress(); error FailedToSendEther(); error InvalidMerkleProof(); error OnlyLayerZeroEndpoint(); error OnlyYT(); error OnlyYCFactory(); error OnlyWhitelisted(); // Swap Aggregator error SAInsufficientTokenIn(address tokenIn, uint256 amountExpected, uint256 amountActual); error UnsupportedSelector(uint256 aggregatorType, bytes4 selector);}

File 28 of 34 : PMath.sol

// SPDX-License-Identifier: GPL-3.0-or-later// This program is free software: you can redistribute it and/or modify// it under the terms of the GNU General Public License as published by// the Free Software Foundation, either version 3 of the License, or// (at your option) any later version.// This program is distributed in the hope that it will be useful,// but WITHOUT ANY WARRANTY; without even the implied warranty of// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the// GNU General Public License for more details.// You should have received a copy of the GNU General Public License// along with this program. If not, see <http://www.gnu.org/licenses/>.pragma solidity ^0.8.0;/* solhint-disable private-vars-leading-underscore, reason-string */library PMath { uint256 internal constant ONE = 1e18; // 18 decimal places int256 internal constant IONE = 1e18; // 18 decimal places function subMax0(uint256 a, uint256 b) internal pure returns (uint256) { unchecked { return (a >= b ? a - b : 0); } } function subNoNeg(int256 a, int256 b) internal pure returns (int256) { require(a >= b, "negative"); return a - b; // no unchecked since if b is very negative, a - b might overflow } function mulDown(uint256 a, uint256 b) internal pure returns (uint256) { uint256 product = a * b; unchecked { return product / ONE; } } function mulDown(int256 a, int256 b) internal pure returns (int256) { int256 product = a * b; unchecked { return product / IONE; } } function divDown(uint256 a, uint256 b) internal pure returns (uint256) { uint256 aInflated = a * ONE; unchecked { return aInflated / b; } } function divDown(int256 a, int256 b) internal pure returns (int256) { int256 aInflated = a * IONE; unchecked { return aInflated / b; } } function rawDivUp(uint256 a, uint256 b) internal pure returns (uint256) { return (a + b - 1) / b; } // @author Uniswap function sqrt(uint256 y) internal pure returns (uint256 z) { if (y > 3) { z = y; uint256 x = y / 2 + 1; while (x < z) { z = x; x = (y / x + x) / 2; } } else if (y != 0) { z = 1; } } function square(uint256 x) internal pure returns (uint256) { return x * x; } function squareDown(uint256 x) internal pure returns (uint256) { return mulDown(x, x); } function abs(int256 x) internal pure returns (uint256) { return uint256(x > 0 ? x : -x); } function neg(int256 x) internal pure returns (int256) { return x * (-1); } function neg(uint256 x) internal pure returns (int256) { return Int(x) * (-1); } function max(uint256 x, uint256 y) internal pure returns (uint256) { return (x > y ? x : y); } function max(int256 x, int256 y) internal pure returns (int256) { return (x > y ? x : y); } function min(uint256 x, uint256 y) internal pure returns (uint256) { return (x < y ? x : y); } function min(int256 x, int256 y) internal pure returns (int256) { return (x < y ? x : y); } /*/////////////////////////////////////////////////////////////// SIGNED CASTS //////////////////////////////////////////////////////////////*/ function Int(uint256 x) internal pure returns (int256) { require(x <= uint256(type(int256).max)); return int256(x); } function Int128(int256 x) internal pure returns (int128) { require(type(int128).min <= x && x <= type(int128).max); return int128(x); } function Int128(uint256 x) internal pure returns (int128) { return Int128(Int(x)); } /*/////////////////////////////////////////////////////////////// UNSIGNED CASTS //////////////////////////////////////////////////////////////*/ function Uint(int256 x) internal pure returns (uint256) { require(x >= 0); return uint256(x); } function Uint32(uint256 x) internal pure returns (uint32) { require(x <= type(uint32).max); return uint32(x); } function Uint64(uint256 x) internal pure returns (uint64) { require(x <= type(uint64).max); return uint64(x); } function Uint112(uint256 x) internal pure returns (uint112) { require(x <= type(uint112).max); return uint112(x); } function Uint96(uint256 x) internal pure returns (uint96) { require(x <= type(uint96).max); return uint96(x); } function Uint128(uint256 x) internal pure returns (uint128) { require(x <= type(uint128).max); return uint128(x); } function Uint192(uint256 x) internal pure returns (uint192) { require(x <= type(uint192).max); return uint192(x); } function isAApproxB(uint256 a, uint256 b, uint256 eps) internal pure returns (bool) { return mulDown(b, ONE - eps) <= a && a <= mulDown(b, ONE + eps); } function isAGreaterApproxB(uint256 a, uint256 b, uint256 eps) internal pure returns (bool) { return a >= b && a <= mulDown(b, ONE + eps); } function isASmallerApproxB(uint256 a, uint256 b, uint256 eps) internal pure returns (bool) { return a <= b && a >= mulDown(b, ONE - eps); }}

File 29 of 34 : TokenHelper.sol

// SPDX-License-Identifier: GPL-3.0-or-laterpragma solidity ^0.8.0;import "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol";import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";import "../../interfaces/IWETH.sol";abstract contract TokenHelper { using SafeERC20 for IERC20; address internal constant NATIVE = address(0); uint256 internal constant LOWER_BOUND_APPROVAL = type(uint96).max / 2; // some tokens use 96 bits for approval function _transferIn(address token, address from, uint256 amount) internal { if (token == NATIVE) require(msg.value == amount, "eth mismatch"); else if (amount != 0) IERC20(token).safeTransferFrom(from, address(this), amount); } function _transferFrom(IERC20 token, address from, address to, uint256 amount) internal { if (amount != 0) token.safeTransferFrom(from, to, amount); } function _transferOut(address token, address to, uint256 amount) internal { if (amount == 0) return; if (token == NATIVE) { (bool success, ) = to.call{value: amount}(""); require(success, "eth send failed"); } else { IERC20(token).safeTransfer(to, amount); } } function _transferOut(address[] memory tokens, address to, uint256[] memory amounts) internal { uint256 numTokens = tokens.length; require(numTokens == amounts.length, "length mismatch"); for (uint256 i = 0; i < numTokens; ) { _transferOut(tokens[i], to, amounts[i]); unchecked { i++; } } } function _selfBalance(address token) internal view returns (uint256) { return (token == NATIVE) ? address(this).balance : IERC20(token).balanceOf(address(this)); } function _selfBalance(IERC20 token) internal view returns (uint256) { return token.balanceOf(address(this)); } /// @notice Approves the stipulated contract to spend the given allowance in the given token /// @dev PLS PAY ATTENTION to tokens that requires the approval to be set to 0 before changing it function _safeApprove(address token, address to, uint256 value) internal { (bool success, bytes memory data) = token.call(abi.encodeWithSelector(IERC20.approve.selector, to, value)); require(success && (data.length == 0 || abi.decode(data, (bool))), "Safe Approve"); } function _safeApproveInf(address token, address to) internal { if (token == NATIVE) return; if (IERC20(token).allowance(address(this), to) < LOWER_BOUND_APPROVAL) { _safeApprove(token, to, 0); _safeApprove(token, to, type(uint256).max); } } function _wrap_unwrap_ETH(address tokenIn, address tokenOut, uint256 netTokenIn) internal { if (tokenIn == NATIVE) IWETH(tokenOut).deposit{value: netTokenIn}(); else IWETH(tokenIn).withdraw(netTokenIn); }}

File 30 of 34 : SYBase.sol

// SPDX-License-Identifier: GPL-3.0-or-laterpragma solidity ^0.8.0;import "../../interfaces/IStandardizedYield.sol";import "../erc20/PendleERC20Permit.sol";import "../libraries/math/PMath.sol";import "../libraries/TokenHelper.sol";import "../libraries/ArrayLib.sol";import "../libraries/Errors.sol";import "../libraries/BoringOwnableUpgradeable.sol";import "@openzeppelin/contracts/security/Pausable.sol";abstract contract SYBase is IStandardizedYield, PendleERC20Permit, TokenHelper, BoringOwnableUpgradeable, Pausable { using PMath for uint256; address public immutable yieldToken; constructor( string memory _name, string memory _symbol, address _yieldToken ) PendleERC20Permit(_name, _symbol, IERC20Metadata(_yieldToken).decimals()) initializer { yieldToken = _yieldToken; __BoringOwnable_init(); } // solhint-disable no-empty-blocks receive() external payable {} /*/////////////////////////////////////////////////////////////// DEPOSIT/REDEEM USING BASE TOKENS //////////////////////////////////////////////////////////////*/ /** * @dev See {IStandardizedYield-deposit} */ function deposit( address receiver, address tokenIn, uint256 amountTokenToDeposit, uint256 minSharesOut ) external payable nonReentrant returns (uint256 amountSharesOut) { if (!isValidTokenIn(tokenIn)) revert Errors.SYInvalidTokenIn(tokenIn); if (amountTokenToDeposit == 0) revert Errors.SYZeroDeposit(); _transferIn(tokenIn, msg.sender, amountTokenToDeposit); amountSharesOut = _deposit(tokenIn, amountTokenToDeposit); if (amountSharesOut < minSharesOut) revert Errors.SYInsufficientSharesOut(amountSharesOut, minSharesOut); _mint(receiver, amountSharesOut); emit Deposit(msg.sender, receiver, tokenIn, amountTokenToDeposit, amountSharesOut); } /** * @dev See {IStandardizedYield-redeem} */ function redeem( address receiver, uint256 amountSharesToRedeem, address tokenOut, uint256 minTokenOut, bool burnFromInternalBalance ) external nonReentrant returns (uint256 amountTokenOut) { if (!isValidTokenOut(tokenOut)) revert Errors.SYInvalidTokenOut(tokenOut); if (amountSharesToRedeem == 0) revert Errors.SYZeroRedeem(); if (burnFromInternalBalance) { _burn(address(this), amountSharesToRedeem); } else { _burn(msg.sender, amountSharesToRedeem); } amountTokenOut = _redeem(receiver, tokenOut, amountSharesToRedeem); if (amountTokenOut < minTokenOut) revert Errors.SYInsufficientTokenOut(amountTokenOut, minTokenOut); emit Redeem(msg.sender, receiver, tokenOut, amountSharesToRedeem, amountTokenOut); } /** * @notice mint shares based on the deposited base tokens * @param tokenIn base token address used to mint shares * @param amountDeposited amount of base tokens deposited * @return amountSharesOut amount of shares minted */ function _deposit(address tokenIn, uint256 amountDeposited) internal virtual returns (uint256 amountSharesOut); /** * @notice redeems base tokens based on amount of shares to be burned * @param tokenOut address of the base token to be redeemed * @param amountSharesToRedeem amount of shares to be burned * @return amountTokenOut amount of base tokens redeemed */ function _redeem( address receiver, address tokenOut, uint256 amountSharesToRedeem ) internal virtual returns (uint256 amountTokenOut); /*/////////////////////////////////////////////////////////////// EXCHANGE-RATE //////////////////////////////////////////////////////////////*/ /** * @dev See {IStandardizedYield-exchangeRate} */ function exchangeRate() external view virtual override returns (uint256 res); /*/////////////////////////////////////////////////////////////// REWARDS-RELATED //////////////////////////////////////////////////////////////*/ /** * @dev See {IStandardizedYield-claimRewards} */ function claimRewards(address /*user*/) external virtual override returns (uint256[] memory rewardAmounts) { rewardAmounts = new uint256[](0); } /** * @dev See {IStandardizedYield-getRewardTokens} */ function getRewardTokens() external view virtual override returns (address[] memory rewardTokens) { rewardTokens = new address[](0); } /** * @dev See {IStandardizedYield-accruedRewards} */ function accruedRewards(address /*user*/) external view virtual override returns (uint256[] memory rewardAmounts) { rewardAmounts = new uint256[](0); } function rewardIndexesCurrent() external virtual override returns (uint256[] memory indexes) { indexes = new uint256[](0); } function rewardIndexesStored() external view virtual override returns (uint256[] memory indexes) { indexes = new uint256[](0); } /*/////////////////////////////////////////////////////////////// MISC METADATA FUNCTIONS //////////////////////////////////////////////////////////////*/ function previewDeposit( address tokenIn, uint256 amountTokenToDeposit ) external view virtual returns (uint256 amountSharesOut) { if (!isValidTokenIn(tokenIn)) revert Errors.SYInvalidTokenIn(tokenIn); return _previewDeposit(tokenIn, amountTokenToDeposit); } function previewRedeem( address tokenOut, uint256 amountSharesToRedeem ) external view virtual returns (uint256 amountTokenOut) { if (!isValidTokenOut(tokenOut)) revert Errors.SYInvalidTokenOut(tokenOut); return _previewRedeem(tokenOut, amountSharesToRedeem); } function pause() external onlyOwner { _pause(); } function unpause() external onlyOwner { _unpause(); } function _beforeTokenTransfer(address, address, uint256) internal virtual override whenNotPaused {} function _previewDeposit( address tokenIn, uint256 amountTokenToDeposit ) internal view virtual returns (uint256 amountSharesOut); function _previewRedeem( address tokenOut, uint256 amountSharesToRedeem ) internal view virtual returns (uint256 amountTokenOut); function getTokensIn() public view virtual returns (address[] memory res); function getTokensOut() public view virtual returns (address[] memory res); function isValidTokenIn(address token) public view virtual returns (bool); function isValidTokenOut(address token) public view virtual returns (bool);}

File 31 of 34 : IERC4626.sol

// SPDX-License-Identifier: GPL-3.0-or-later/* * MIT License * =========== * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in all * copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE */pragma solidity ^0.8.0;import "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol";interface IERC4626 is IERC20Metadata { function asset() external view returns (address); function deposit(uint256 assets, address receiver) external returns (uint256); function redeem(uint256 shares, address receiver, address owner) external returns (uint256); function convertToAssets(uint256 shares) external view returns (uint256); function previewDeposit(uint256 assets) external view returns (uint256); function previewRedeem(uint256 shares) external view returns (uint256); function totalAssets() external view returns (uint256);}

File 32 of 34 : IStandardizedYield.sol

// SPDX-License-Identifier: GPL-3.0-or-later/* * MIT License * =========== * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in all * copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE */pragma solidity ^0.8.0;import "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol";interface IStandardizedYield is IERC20Metadata { /// @dev Emitted when any base tokens is deposited to mint shares event Deposit( address indexed caller, address indexed receiver, address indexed tokenIn, uint256 amountDeposited, uint256 amountSyOut ); /// @dev Emitted when any shares are redeemed for base tokens event Redeem( address indexed caller, address indexed receiver, address indexed tokenOut, uint256 amountSyToRedeem, uint256 amountTokenOut ); /// @dev check `assetInfo()` for more information enum AssetType { TOKEN, LIQUIDITY } /// @dev Emitted when (`user`) claims their rewards event ClaimRewards(address indexed user, address[] rewardTokens, uint256[] rewardAmounts); /** * @notice mints an amount of shares by depositing a base token. * @param receiver shares recipient address * @param tokenIn address of the base tokens to mint shares * @param amountTokenToDeposit amount of base tokens to be transferred from (`msg.sender`) * @param minSharesOut reverts if amount of shares minted is lower than this * @return amountSharesOut amount of shares minted * @dev Emits a {Deposit} event * * Requirements: * - (`tokenIn`) must be a valid base token. */ function deposit( address receiver, address tokenIn, uint256 amountTokenToDeposit, uint256 minSharesOut ) external payable returns (uint256 amountSharesOut); /** * @notice redeems an amount of base tokens by burning some shares * @param receiver recipient address * @param amountSharesToRedeem amount of shares to be burned * @param tokenOut address of the base token to be redeemed * @param minTokenOut reverts if amount of base token redeemed is lower than this * @param burnFromInternalBalance if true, burns from balance of `address(this)`, otherwise burns from `msg.sender` * @return amountTokenOut amount of base tokens redeemed * @dev Emits a {Redeem} event * * Requirements: * - (`tokenOut`) must be a valid base token. */ function redeem( address receiver, uint256 amountSharesToRedeem, address tokenOut, uint256 minTokenOut, bool burnFromInternalBalance ) external returns (uint256 amountTokenOut); /** * @notice exchangeRate * syBalance / 1e18 must return the asset balance of the account * @notice vice-versa, if a user uses some amount of tokens equivalent to X asset, the amount of sy he can mint must be X * exchangeRate / 1e18 * @dev SYUtils's assetToSy & syToAsset should be used instead of raw multiplication & division */ function exchangeRate() external view returns (uint256 res); /** * @notice claims reward for (`user`) * @param user the user receiving their rewards * @return rewardAmounts an array of reward amounts in the same order as `getRewardTokens` * @dev * Emits a `ClaimRewards` event * See {getRewardTokens} for list of reward tokens */ function claimRewards(address user) external returns (uint256[] memory rewardAmounts); /** * @notice get the amount of unclaimed rewards for (`user`) * @param user the user to check for * @return rewardAmounts an array of reward amounts in the same order as `getRewardTokens` */ function accruedRewards(address user) external view returns (uint256[] memory rewardAmounts); function rewardIndexesCurrent() external returns (uint256[] memory indexes); function rewardIndexesStored() external view returns (uint256[] memory indexes); /** * @notice returns the list of reward token addresses */ function getRewardTokens() external view returns (address[] memory); /** * @notice returns the address of the underlying yield token */ function yieldToken() external view returns (address); /** * @notice returns all tokens that can mint this SY */ function getTokensIn() external view returns (address[] memory res); /** * @notice returns all tokens that can be redeemed by this SY */ function getTokensOut() external view returns (address[] memory res); function isValidTokenIn(address token) external view returns (bool); function isValidTokenOut(address token) external view returns (bool); function previewDeposit( address tokenIn, uint256 amountTokenToDeposit ) external view returns (uint256 amountSharesOut); function previewRedeem( address tokenOut, uint256 amountSharesToRedeem ) external view returns (uint256 amountTokenOut); /** * @notice This function contains information to interpret what the asset is * @return assetType the type of the asset (0 for ERC20 tokens, 1 for AMM liquidity tokens, 2 for bridged yield bearing tokens like wstETH, rETH on Arbi whose the underlying asset doesn't exist on the chain) * @return assetAddress the address of the asset * @return assetDecimals the decimals of the asset */ function assetInfo() external view returns (AssetType assetType, address assetAddress, uint8 assetDecimals);}

File 33 of 34 : IWETH.sol

// SPDX-License-Identifier: GPL-3.0-or-later/* * MIT License * =========== * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in all * copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE */pragma solidity ^0.8.0;import "@openzeppelin/contracts/token/ERC20/IERC20.sol";interface IWETH is IERC20 { event Deposit(address indexed dst, uint256 wad); event Withdrawal(address indexed src, uint256 wad); function deposit() external payable; function withdraw(uint256 wad) external;}

File 34 of 34 : ApxETHSY.sol

// SPDX-License-Identifier: GPL-3.0-or-laterpragma solidity 0.8.23;import "@pendle/core-v2/contracts/core/StandardizedYield/SYBase.sol";import "@pendle/core-v2/contracts/interfaces/IERC4626.sol";interface IPirexETH { enum Fees { Deposit, Redemption, InstantRedemption } function deposit( address receiver, bool shouldCompound ) external payable returns (uint256 postFeeAmount, uint256 feeAmount); function instantRedeemWithPxEth( uint256 _assets, address _receiver ) external returns (uint256 postFeeAmount, uint256 feeAmount); function fees(Fees _feeType) external view returns (uint256); function pxEth() external view returns (address); function autoPxEth() external view returns (address); function buffer() external view returns (uint256);}contract ApxETHSY is SYBase { uint256 public constant FEE_DENOMINATOR = 1_000_000; error ApxETHNotEnoughBuffer(); address public immutable pirexETH; address public immutable pxETH; address public immutable apxETH; constructor( address _pirexETH ) SYBase("SY Autocompounding Pirex ETH", "SY-apxETH", IPirexETH(_pirexETH).autoPxEth()) { pirexETH = _pirexETH; pxETH = IPirexETH(_pirexETH).pxEth(); apxETH = IPirexETH(_pirexETH).autoPxEth(); _safeApproveInf(pxETH, apxETH); } /*/////////////////////////////////////////////////////////////// DEPOSIT/REDEEM USING BASE TOKENS //////////////////////////////////////////////////////////////*/ function _deposit( address tokenIn, uint256 amountDeposited ) internal override returns (uint256 /*amountSharesOut*/) { if (tokenIn == apxETH) { return amountDeposited; } uint256 preBalance = _selfBalance(apxETH); if (tokenIn == NATIVE) { IPirexETH(pirexETH).deposit{ value: amountDeposited }(address(this), true); } else { IERC4626(apxETH).deposit(amountDeposited, address(this)); } return _selfBalance(apxETH) - preBalance; } function _redeem( address receiver, address tokenOut, uint256 amountSharesToRedeem ) internal override returns (uint256 amountTokenOut) { if (tokenOut == apxETH) { amountTokenOut = amountSharesToRedeem; } else { uint256 amountPxETH = IERC4626(apxETH).redeem( amountSharesToRedeem, address(this), address(this) ); if (tokenOut == pxETH) { amountTokenOut = amountPxETH; } else { (amountTokenOut, ) = IPirexETH(pirexETH).instantRedeemWithPxEth( amountPxETH, address(this) ); } } _transferOut(tokenOut, receiver, amountTokenOut); } /*/////////////////////////////////////////////////////////////// EXCHANGE-RATE //////////////////////////////////////////////////////////////*/ function exchangeRate() public view override returns (uint256) { return IERC4626(apxETH).convertToAssets(1 ether); } /*/////////////////////////////////////////////////////////////// MISC FUNCTIONS FOR METADATA //////////////////////////////////////////////////////////////*/ function _previewDeposit( address tokenIn, uint256 amountTokenToDeposit ) internal view override returns (uint256 /*amountSharesOut*/) { if (tokenIn == apxETH) { return amountTokenToDeposit; } else { uint256 fee = IPirexETH(pirexETH).fees(IPirexETH.Fees.Deposit); uint256 amountPxETH = amountTokenToDeposit - (amountTokenToDeposit * fee) / FEE_DENOMINATOR; return IERC4626(apxETH).previewDeposit(amountPxETH); } } function _previewRedeem( address tokenOut, uint256 amountSharesToRedeem ) internal view override returns (uint256 /*amountTokenOut*/) { if (tokenOut == apxETH) { return amountSharesToRedeem; } else { uint256 amountPxETH = IERC4626(apxETH).previewRedeem(amountSharesToRedeem); if (tokenOut == pxETH) { return amountPxETH; } else { uint256 feeRatio = IPirexETH(pirexETH).fees(IPirexETH.Fees.InstantRedemption); uint256 postFeeAmount = amountPxETH - (amountPxETH * feeRatio) / FEE_DENOMINATOR; if (postFeeAmount > IPirexETH(pirexETH).buffer()) revert ApxETHNotEnoughBuffer(); return postFeeAmount; } } } function getTokensIn() public view override returns (address[] memory res) { return ArrayLib.create(NATIVE, pxETH, apxETH); } function getTokensOut() public view override returns (address[] memory res) { return ArrayLib.create(NATIVE, pxETH, apxETH); } function isValidTokenIn(address token) public view override returns (bool) { return token == NATIVE || token == pxETH || token == apxETH; } function isValidTokenOut(address token) public view override returns (bool) { return token == NATIVE || token == pxETH || token == apxETH; } function assetInfo() external view returns (AssetType assetType, address assetAddress, uint8 assetDecimals) { return (AssetType.TOKEN, pxETH, 18); }}

Settings

{ "optimizer": { "enabled": true, "runs": 1000000 }, "viaIR": true, "evmVersion": "paris", "outputSelection": { "*": { "*": [ "evm.bytecode", "evm.deployedBytecode", "devdoc", "userdoc", "metadata", "abi" ] } }, "libraries": {}}

Contract Security Audit

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"_pirexETH","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"ApxETHNotEnoughBuffer","type":"error"},{"inputs":[],"name":"InvalidShortString","type":"error"},{"inputs":[{"internalType":"uint256","name":"actualSharesOut","type":"uint256"},{"internalType":"uint256","name":"requiredSharesOut","type":"uint256"}],"name":"SYInsufficientSharesOut","type":"error"},{"inputs":[{"internalType":"uint256","name":"actualTokenOut","type":"uint256"},{"internalType":"uint256","name":"requiredTokenOut","type":"uint256"}],"name":"SYInsufficientTokenOut","type":"error"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"SYInvalidTokenIn","type":"error"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"SYInvalidTokenOut","type":"error"},{"inputs":[],"name":"SYZeroDeposit","type":"error"},{"inputs":[],"name":"SYZeroRedeem","type":"error"},{"inputs":[{"internalType":"string","name":"str","type":"string"}],"name":"StringTooLong","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":false,"internalType":"address[]","name":"rewardTokens","type":"address[]"},{"indexed":false,"internalType":"uint256[]","name":"rewardAmounts","type":"uint256[]"}],"name":"ClaimRewards","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"caller","type":"address"},{"indexed":true,"internalType":"address","name":"receiver","type":"address"},{"indexed":true,"internalType":"address","name":"tokenIn","type":"address"},{"indexed":false,"internalType":"uint256","name":"amountDeposited","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amountSyOut","type":"uint256"}],"name":"Deposit","type":"event"},{"anonymous":false,"inputs":[],"name":"EIP712DomainChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint8","name":"version","type":"uint8"}],"name":"Initialized","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Paused","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"caller","type":"address"},{"indexed":true,"internalType":"address","name":"receiver","type":"address"},{"indexed":true,"internalType":"address","name":"tokenOut","type":"address"},{"indexed":false,"internalType":"uint256","name":"amountSyToRedeem","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amountTokenOut","type":"uint256"}],"name":"Redeem","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Unpaused","type":"event"},{"inputs":[],"name":"DOMAIN_SEPARATOR","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"FEE_DENOMINATOR","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"accruedRewards","outputs":[{"internalType":"uint256[]","name":"rewardAmounts","type":"uint256[]"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"apxETH","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"assetInfo","outputs":[{"internalType":"enum IStandardizedYield.AssetType","name":"assetType","type":"uint8"},{"internalType":"address","name":"assetAddress","type":"address"},{"internalType":"uint8","name":"assetDecimals","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"claimOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"claimRewards","outputs":[{"internalType":"uint256[]","name":"rewardAmounts","type":"uint256[]"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"},{"internalType":"address","name":"tokenIn","type":"address"},{"internalType":"uint256","name":"amountTokenToDeposit","type":"uint256"},{"internalType":"uint256","name":"minSharesOut","type":"uint256"}],"name":"deposit","outputs":[{"internalType":"uint256","name":"amountSharesOut","type":"uint256"}],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"eip712Domain","outputs":[{"internalType":"bytes1","name":"fields","type":"bytes1"},{"internalType":"string","name":"name","type":"string"},{"internalType":"string","name":"version","type":"string"},{"internalType":"uint256","name":"chainId","type":"uint256"},{"internalType":"address","name":"verifyingContract","type":"address"},{"internalType":"bytes32","name":"salt","type":"bytes32"},{"internalType":"uint256[]","name":"extensions","type":"uint256[]"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"exchangeRate","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getRewardTokens","outputs":[{"internalType":"address[]","name":"rewardTokens","type":"address[]"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getTokensIn","outputs":[{"internalType":"address[]","name":"res","type":"address[]"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getTokensOut","outputs":[{"internalType":"address[]","name":"res","type":"address[]"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"isValidTokenIn","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"isValidTokenOut","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"nonces","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pause","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"paused","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pendingOwner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"uint256","name":"deadline","type":"uint256"},{"internalType":"uint8","name":"v","type":"uint8"},{"internalType":"bytes32","name":"r","type":"bytes32"},{"internalType":"bytes32","name":"s","type":"bytes32"}],"name":"permit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"pirexETH","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"tokenIn","type":"address"},{"internalType":"uint256","name":"amountTokenToDeposit","type":"uint256"}],"name":"previewDeposit","outputs":[{"internalType":"uint256","name":"amountSharesOut","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"tokenOut","type":"address"},{"internalType":"uint256","name":"amountSharesToRedeem","type":"uint256"}],"name":"previewRedeem","outputs":[{"internalType":"uint256","name":"amountTokenOut","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pxETH","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"},{"internalType":"uint256","name":"amountSharesToRedeem","type":"uint256"},{"internalType":"address","name":"tokenOut","type":"address"},{"internalType":"uint256","name":"minTokenOut","type":"uint256"},{"internalType":"bool","name":"burnFromInternalBalance","type":"bool"}],"name":"redeem","outputs":[{"internalType":"uint256","name":"amountTokenOut","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"rewardIndexesCurrent","outputs":[{"internalType":"uint256[]","name":"indexes","type":"uint256[]"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"rewardIndexesStored","outputs":[{"internalType":"uint256[]","name":"indexes","type":"uint256[]"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"},{"internalType":"bool","name":"direct","type":"bool"},{"internalType":"bool","name":"renounce","type":"bool"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"unpause","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"yieldToken","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"stateMutability":"payable","type":"receive"}]

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

Deployed Bytecode

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

Constructor Arguments (ABI-Encoded and is the last bytes of the Contract Creation Code above)

000000000000000000000000d664b74274dfeb538d9bac494f3a4760828b02b0
-----Decoded View---------------
Arg [0] : _pirexETH (address): 0xD664b74274DfEB538d9baC494F3a4760828B02b0
-----Encoded View---------------
1 Constructor Arguments found :
Arg [0] : 000000000000000000000000d664b74274dfeb538d9bac494f3a4760828b02b0